784769
26
Zoom out
Zoom in
Previous page
1/60
Next page
26
SET LCD DISPLAY CONTRAST
In normal mode, press [ SNOOZE / CONTRAST ] key to adjust LCD contrast for best viewing on
table stand or wall mounted.
7. MAINTENANCE
BATTERY REPLACEMENT
When low battery indicator “ ” is displayed in Out or CH section of the LCD display, it indicates
that the wireless 7-in-1 or current channel sensor battery power give wireless sensor shown is
low respectively. Please replace with new batteries.
WIRELESS 7-IN-1 SENSOR MAINTENANCE
REPLACE THE WIND VANE
Unscrew and remove the wind
vane for replacement
REPLACE THE WIND CUP
1.
Remove rubber cap and Unscrew
2.
Remove the wind cup for
replacement
CLEANING THE RAIN COLLECTOR
1.
Rotate the rain collector by turning it
30°anti-clockwise.
2.
Gently remove the rain collector.
3. Clean and remove any debris or
insects.
4.
Install the collector when it is clean
and fully dried.
CLEANING THE UV SENSOR AND
CALIBRATION
For precision UV measurement,
gentle clean the UV sensor cover
lens with damp micro-ber cloth.
Over time, the UV sensor will
naturally degrade. The UV sensor
can be calibrated with a utility
grade UV meter, please refer to
Calibration section in previous page
for about the UV sensor calibration.
CLEANING HYGRO-THERMO
SENSOR
1.
Remove the 2 screws at the bottom
of the radiation shield.
2.
Gently pull out the bottom 4 shields.
3.
Carefully remove any dirt or insects
on the sensor (do not let the sensors
inside get wet).
4.
Clean the shield with water to
remove any dirt or insects.
5. Install all the parts back when they
are clean and fully dried.
8. TROUBLESHOOT
Problems Solution
Strange or no measurement
of Rain Sensor
1. Check the drain hole in the rain collector.
2. Check the balance indicator.
Strange or no measurement
of Thermo / Hygro Sensor
1. Check the radiation shield.
2. Check the sensor casing.
Strange or no measurement
of Wind Speed and Direction
1. Check wind cups (Anemometer).
2. Check the wind vane.
and (Signal lost for 15
minutes)
and (Signal lost for 1
hour)
1. Relocate the console and 7-IN-1 sensor closer to each
other.
2. Make sure the console is placed away from other
electronic Appliances that may interfere with the wireless
communication (TVs, computers, microwaves).
3. If problem continues, reset both console and 7-IN-1
sensor.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bresser 7003600 ClimateConnect Tuya at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bresser 7003600 ClimateConnect Tuya in the language / languages: English, German as an attachment in your email.

The manual is 4.13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bresser 7003600 ClimateConnect Tuya

Bresser 7003600 ClimateConnect Tuya User Manual - French - 32 pages

Bresser 7003600 ClimateConnect Tuya User Manual - Portuguese, Spanish - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info