784769
7
Zoom out
Zoom in
Previous page
1/60
Next page
7
1.2 OVERVIEW
CONSOLE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
1. [ SNOOZE/CONTRAST ]
key
2. LCD display
3. [ MEM ] key
4. [ RAIN ] key
5. [ BARO ] key
6. Wall mounting hole
7. [ WIND / + ] key
8. [ NDX / - ] key
9. Table stand
10. Power jack
11. [ ON / AUTO ] slide switch
12. [ CH / SET ] key
13. [ ALARM ] key
14. [ CAL ] key
15. [ SENSOR / WI-FI ] key
16. [ RESET ] key
17. Battery door
2. PRE-INSTALLATION
2.1 CHECKOUT
Before permanently install your weather station, we recommend the user to operate the weather station
at a location which is easy to access to. This will allow you to get familiar with the weather station
functions and calibration procedures, to ensure proper operation before installing it permanently.
2.2 SITE SELECTION
Before installing the sensor array, please consider the followings:
1. Rain gauge must be cleaned every few months.
2. Batteries must be changed about every 1.5 years.
3. Avoid radiant heat reected from any adjacent buildings and structures. Ideally, the sensor
array should be installed at 1.5m (5’) from any building, structure, ground or roof top.
4. Select an open area for the sensor that allows moderate direct sunlight and no stormy
precipitation.
5. Transmission range between sensor array and display console could reach a distance of
100m (or 300 feet) at line of sight, providing there are no interfering obstacles in between
or nearby such as trees, towers, or high voltage line. Check the reception signal quality to
ensure good reception.
6. Household appliance such as fridge, lighting, dimmers may pose Electro-magnetic
interference (EMI), while Radio Frequency Interference (RFI) from devices operating in the
same frequency range may cause signal intermittent. Choose a location at least 1-2 meter
(3-5 feet) away from these interference sources to ensure best reception.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bresser 7003600 ClimateConnect Tuya at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bresser 7003600 ClimateConnect Tuya in the language / languages: English, German as an attachment in your email.

The manual is 4.13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bresser 7003600 ClimateConnect Tuya

Bresser 7003600 ClimateConnect Tuya User Manual - French - 32 pages

Bresser 7003600 ClimateConnect Tuya User Manual - Portuguese, Spanish - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info