784774
42
Zoom out
Zoom in
Previous page
1/104
Next page
42
12.2 UPDATE THE WI-FI FIRMWARE
The WI-FI rmware supports OTA update capability. Its rmware can be updated over the air anytime
(whenever necessary) through any web-browser on a PC/Mac with WI-FI connectivity. However, it is not
available through mobile/smart devices.
Firmware version: 1.00
Browse
Upload
Current rmware
version
Bottom of web interface ADVANCED page
Press to start upload the
rmware to console
Please to select the rmware le
for update
12.2.1 WI-FI FIRMWARE UPDATE STEP
1. Download the latest version rmware to your PC/Mac.
2. Set the Console into AP (access point) mode then connect the PC/Mac to the console (ref to "SETUP
WI-FI CONNECTION" section in previous page).
3. Click the Browse in rmware update section and browse the location of the le you download in
step 1. To update the WI-FI rmware, click the Browse in WI-FI rmware section.
4. Click the corresponding Upload to start transfer the rmware le to console.
5. In the meantime, the console will execute the update automatically and will show the update progress
on display. (The update time is around 1 ~ 2 minutes)
6. The console will restart once the update is completed.
7. The console will stay in AP mode for you to check the rmware version and all the current setting.
IMPORTANT NOTE:
- Please keep connecting the power during the rmware update process.
- Please make sure your PC/Mac's WI-FI connection is stable.
- When the update process start, do not operate the PC/Mac and console until the update nished.
- During rmware update the console will stop upload data to the cloud server. It will reconnect to your WI-
FI router and upload the data again once the rmware update succeed. If the console cannot connect to
your router, please enter the SETUP page to setup again.
- After the rmware update, if the setup information is missing, please input the setup information again.
- Firmware update process have potential risk, which cannot guarantee 100% success. If the update fail,
please redo the above step to update again.
13. OTHER OPERATION
13.1 REPLACE CURRENT SENSOR(S) BATTERIES
The console can pair-up the sensor again, When changed the new batteries of the wireless 7-in-1 weather
sensor or other channel sensor(s). If the sensor cannot pair-up within 2 minutes, please follow the below
step to done manually as below:
13.1.1 PAIRING UP THE SENSOR(S) MANUALLY
1. Change all the batteries to new ones in the sensor(s).
2. Follow the "Add new sensor" step in section 7.9.5.1 to pair the sensor again.
13.2 PAIR UP THE ADDITIONAL WIRELESS SENSOR(S) (OPTIONAL)
The console can support up to 7 additional wireless sensors,
1. Select the channel in sensor(s)
2. Change all the batteries to new ones in the sensor(s).
3. Follow the "Add new sensor" step in section 7.9.5.1 to pair the sensor again.
NOTE:
- Channel number of the additional wireless sensor must not be duplicated among the sensors.
- This console can support di󰀨erent type of additional wireless sensor, e.g. soil moisture and pool sensor. If
you would like to pair up additional sensors, please check with your retailer for more detail.
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bresser 7003500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bresser 7003500 in the language / languages: English, German as an attachment in your email.

The manual is 5.32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bresser 7003500

Bresser 7003500 User Manual - Dutch - 56 pages

Bresser 7003500 User Manual - French - 56 pages

Bresser 7003500 User Manual - Spanish - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info