784774
11
Zoom out
Zoom in
Previous page
1/104
Next page
11
NOTE:
- When batteries are inserted (or reset), the sensor is in synchronization mode, and can be registered to
the console display within the next 5 minutes.
- If you need to re-assign the sensor channel, slide the channel slide switch to the new channel position. For
the new channel number to be e󰀨ective, press [ RESET ] key on the sensor.
- To avoid the sensor/s and console pairing failure during new console setup, please power up the sensor/s
rst, and then press [ RESET ] key on the main unit (no need on sensors).
6.2.2 SENSOR PLACEMENT
When mounting the Thermo-Hygrometer sensor outside, it’s recommendable
that the sensor in located at a shaded area, away from direct sunlight and any
heat source, and at a height at or above the console display.
Place a screw on the wall that you wish to hang the sensor on. Hang
the sensor onto the screw by the wall mounting holder. You can also place the
sensor on a table by itself.
6.3 OPTIONAL SENSOR
The weather station works with the following optional sensors:
MODEL 7009999 7009972 7009973
NO OF CHANNEL 1-7
DESCRIPTION High Precision Thermo-
Hygrometer sensor
Soil Moisture and
Temperature Sensor
Pool Sensor
IMAGE
6.4 RECOMMENDATION FOR BEST WIRELESS COMMUNICATION
E󰀨ective wireless communication is susceptible to noise interference in the environment, and distance and
barriers between the sensor transmitter and the display console.
1. Electromagnetic interference (EMI) – these may be generated by machinery, appliances, lighting,
dimmers and computers, etc. So please keep your display console 1 or 2 meters away from these items.
2. Radio-frequency interference (RFI) – if you have other devices operating on 868 / 915 / 917 MHz, you
might experience communication intermittent. Please re-located your transmitter or display console to
avoid signal intermittent problem.
3. Distance. Path loss occurs naturally with distance. This device is rated to 100m (300 feet) by line of sight
(in interference free environment and without barriers). However, typically you will get 30m (100 feet)
maximum in real life installation, which includes passing through barriers.
4. Barriers. Radio signal are blocked by metal barriers such as aluminum cladding. Please align the
Multisensor and display console to get them in clear line of sight through window if you have metal
cladding.
EN
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bresser 7003500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bresser 7003500 in the language / languages: English, German as an attachment in your email.

The manual is 5.32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bresser 7003500

Bresser 7003500 User Manual - Dutch - 56 pages

Bresser 7003500 User Manual - French - 56 pages

Bresser 7003500 User Manual - Spanish - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info