Manual Bresser 7002511 Weather Center 5-in-1 (page 15 of 20) (English, German)

729988

Zoom out

Zoom in

1/20

HISTORY DATA

(all records in the past 24 hours)

The main unit automatically records and displays data of the past 24

hours on the hour.

To check all the history data in the past 24 hours, press the HISTORY

button.

E.g. current time 7:25 a.m., Mach 28:

Press HISTORY button repeatedly to view past readings at 7:00am,

6:00am, 5:00am, …, 5:00am (Mar 27), 6:00am (Mar 27), 7:00am (Mar 27)

The LCD will display the past indoor and outdoor temperature & humidity,

value of air pressure, wind chill, wind speed, rainfall and their time and

date.

MAXIMUM / MINIMUM MEMORY FUNCTION

1. Press MAX/MIN button to check the maximum/minimum records.

The checking orders will be: Outdoor max temperature > Outdoor min

temperature > Outdoor max humidity > Outdoor min humidity > Indoor

max temperature > Indoor min temperature > Indoor max humidity

> Indoor min humidity > Outdoor max wind chill > Outdoor min wind

chill > Outdoor max heat index > Outdoor min heat index > Indoor max

dewpoint > Indoor min dewpoint > Max pressure > Min pressure > Max

average > Max gust > Max rainfall.

2. Press and hold MAX/MIN button for 2 seconds to reset the maximum

and minimum records.

NOTE!

When maximum or minimum reading is displayed, the corresponding

timestamp will be shown.

HI / LO ALERT

HI/LO alert are used to alert you of certain weather conditions. Once

activated, the alarm will turn on and amber LED starts flashing when a

certain criterion is met. The following are areas and type of alert provided:

Bereich Verfügbarer Alarm-

Typ

Indoor temperature HI AL / LO AL

Indoor humidity HI AL / LO AL

Outdoor temperaturw HI AL / LO AL

Outdoor humidity HI AL / LO AL

Rainfall HI AL*

Wind speed HI AL

*Daily rainfall since midnight

HI / LO alert setting (Fig. 29)

1. Press

button several times until the desired area is selected.

2. Use

or buttons to adjust the setting.

3. Press

button to confirm and continue to next setting.

Fig. 29

Enable/Disable HI / LO alert (Fig. 30)

1. Press

button several times until the desired area is selected..

2. Press

button to turn the alert on or off.

3. Press

button again to confirm and continue to next setting.

Fig. 30

NOTE!

1. The unit will automatically exit setting mode in 5 seconds if no

button is pressed.

2. When ALERT alarm is on, the area and type of alarm that triggered the

alarm will be flashing and the alarm will sound for 2 minutes.

3. Press SNOOZE/LIGHT button when alarm sounds to interrupt the

alarm. The alarm will then start again after 5 minutes.

4. Press

button when alarm sounds to deactivate the alarm until

next time.

The alarm automatically turns off after 2 minutes.

WIRELESS SIGNAL RECEPTION

Fig. 31

No sensor Signal searching Strong signal Weak signal Signal lost

The 5-in-1 sensor is capable of transmitting data wirelessly over an

approximate operating of 150m range (line of sight).

Occasionally, due to intermittent physical obstructions or other

environmental interference, the signal may be weaken or lost.

In the case that the sensor signal is lost completely, you will need to

relocate the main unit or the wireless 5-in-1 sensor.

POINTING 5-IN-1 SENSOR TO THE SOUTH

The outdoor 5-in-1 sensor is calibrated to be pointing to North by

default. However, in some cases, users may wish to install the product

with the arrow pointing towards the South, especially for people living

in the Southern hemisphere (e.g. Australia, New Zealand).

1. First install the outdoor 5-in-1 sensor with its arrow pointing to the

South. (Please refer to 'Installation' chapter for mounting details)

2. Press and hold

button for 8 seconds until the upper part (Northern

hemisphere) of the compass rose is blinking.

3. Use

or button to change to lower part (Southern hemisphere).

Fig. 32

Northern hemisphere Southern hemisphere

4. Press button again to confirm and exit.

NOTE!

Changing from hemisphere setting will automatically switch the

direction of the moon phase on the display.

MOON PHASES

In the Northern hemisphere, the moon waxes (the part of the moon we

see that glows after the New Moon) from the right. Hence the sun-lit

area of the moon moves from right to left in the Northern hemisphere,

while in the Southern hemisphere, it moves from left to right. Below are

the 2 tables which illustrate how the moon will appear on the main unit.

Northern hemisphere:

New moon Full moon

Waxing crescent Waning gibbous

First quarter Third quarter

Waxing gibbous Waning crescent

Southern hemisphere:

New moon Full moon

Waxing crescent Waning gibbous

First quarter Third quarter

Waxing gibbous Waning crescent

Manual_7002510_Weather-Center-5-in-1_de-en_BRESSER_v012019a.indd 15 02.01.2019 13:51:12

How do I set the clock on my bresser 7002511 to British winter time? Submitted on 25-10-2020 at 21:31
Reply Report abuse
I cannot change the time from summer time to winter for my area which is in Devon in the UK
Please can you help?
Many thanks,
Paul Submitted on 25-10-2020 at 21:24
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bresser 7002511 Weather Center 5-in-1 in the language / languages: English, German as an attachment in your email.

The manual is 14,17 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bresser 7002511 Weather Center 5-in-1

Bresser 7002511 Weather Center 5-in-1 User Manual - English, German - 20 pages

Bresser 7002511 Weather Center 5-in-1 User Manual - Dutch - 12 pages

Bresser 7002511 Weather Center 5-in-1 User Manual - French, Italian, Spanish - 20 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bresser 7002511 Weather Center 5-in-1 Manual

Product: