730023
8
Zoom out
Zoom in
Previous page
1/16
Next page
8 / 16
7 Automatic time setting
After the power is restored, the unit automatically searches for the radio signal. It takes about 3-8
minutes to complete this process.
If the radio signal is received correctly, the date and time are set automatically and the reception sym-
bol is displayed.
If no radio signal is received, proceed as follows:
1. Press the DOWN button for approx. 2 seconds to initiate the reception of the radio signal again.
2. If no radio signal is still received, the time setting must be made manually.
8 Manual time setting and other user defined
settings
1. In normal display mode, press the TIME SET button for about 3 seconds to enter the settings
mode.
2. Digits to be set are flashing.
3. Press UP or DOWN button to change the value.
4. Press the CLOCK-SET button to confirm the entry and move to the next setting.
5. Sequence of settings: 12/24 hour mode > Time zone (-12 to +12 hours) > Hours > Minutes >
Seconds > Year > Month > Day > Language > Temperature unit > Language
6. Finally press the CLOCK-SET button to save the settings and exit the settings mode.
7. NOTICE!If the unit is set manually, the automatic time setting is deactivated by radio signal
(reception symbol disappears). To initiate the reception of the radio signal again, press the
DOWN key for approx. 3 seconds until the reception symbol reappears in the display and
flashes.
9 Alarm setting
1. Press the ALARM button to display the desired alarm type 1, 2, 3 or 4. The corresponding wake-
up call icon
flashes.
2. Press the ALARM button for approx. 2 seconds for the desired alarm type to enter the alarm time
setting mode.
3. Digits to be set are flashing.
4. Press UP or DOWN button to change the value.
5. Press the CLOCK-SET button to confirm the entry and move to the next setting.
6. Sequence of settings: Hours > minutes
7. Finally, press the CLOCK-SET button to save the settings and exit the setting mode. The icon
for the set wake-up call is shown on the display. The wake-up call is activ-
ated.
8. Press the ALARM button again, or repeatedly if necessary, to deactivate the wake-up call. The
wake-up call icon is no longer displayed. The alarm call is deactivated.
10 Disposal
Dispose of the packaging materials properly, according to their type, such as paper or card-
board. Contact your local waste-disposal service or environmental authority for information
on the proper disposal.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bresser 7001802 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bresser 7001802 in the language / languages: English, German as an attachment in your email.

The manual is 4,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info