771286
33
Zoom out
Zoom in
Previous page
1/56
Next page
33 / 56
19 Feels like temperature
This functionality requires a smartphone or tablet that meets the necessary hardware re-
quirements.
An active Internet connection via Wi-Fi is required for this functionality.
The base station can use an app to graphically display information about the temperature felt in the
"Feels like" display area. (For more information on setting up this functionality, refer to the chapter
"Configuration / Setting up a WIFI connection")
The "Feels like" temperature indicates the temperature value according to the personal temperature
sensation.
20 MAX/MIN weather data
The maximum and minimum readings for indoor and outdoor temperature as well as for the humidity
are stored by the main unit over a period of 24 hours:
1. Press the MEM key several times to display the stored values one after the other.
2. Display sequence: Maximum readings (MAX) > Minimum readings (MIN) > Current readings
3. Press the MEM key for approx. 2 seconds to permanently delete all stored readings.
NOTICE!If a reading is below the recordable range, the display shows "LL.L". If a reading is
above the recordable range, the display shows "HH.H". Find more detailed information on the
recordable ranges in chapter "Technical data".
21 Temperature and humidity display from the
wireless sensor
After the power supply is established, the base station automatically searches for the radio signal from
the sensor. After the data transfer is complete, the temperature and humidity readings for the respect-
ive channel are shown on the display. This may take a few minutes.
The base station supports the connection of up to 3 compatible wireless sensors*. To retrieve the tem-
perature and humidity readings from different sensors, proceed as follows:
1. Press the UP/CH key several times to display the readings for the different sensors one after the
other. The corresponding sensor channel is shown in the display.
2. Press the UP/CH key several times until the symbol appears on the display next to the sensor
channel. The display alternates continuously between the sensor channels until a certain channel
is permanently set.
*1 pc. of wireless sensor included, others optionally available
22 Display brightness regulation
1. In battery-powered operation, touch the SNOOZE/LIGHT touch key to enable full display bright-
ness for about 15 seconds.
2. In mains power operation (DC 5V), press the Settings/Brightness key several times to set the de-
sired display brightness in 3 levels: low - medium - bright
NOTICE!In battery-powered operation, display brightness adjustment is not possible.
23 Technical data
Base station
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bresser 7001040 - WIFI 4Cast at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bresser 7001040 - WIFI 4Cast in the language / languages: English, German, French as an attachment in your email.

The manual is 2.72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bresser 7001040 - WIFI 4Cast

Bresser 7001040 - WIFI 4Cast User Manual - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info