785359

Bresser 7000024 ClimaTemp Hygro DLX Manual

9
Zoom out
Zoom in
Previous page
1/24
Next page
9 / 24
NOTICE!This weather station can be operated with up to 3 remote sensors. Each remote
sensor being connected must be operated on a different channel. If only one remote sensor
is connected, it should be operated on channel 1.
12. Replace the cover and retighten it with the screw.
8 Manual time setting
1. Press and hold MODE button for approx. 3 seconds to change to time setting mode.
2. Digits to be set are flashing.
3. Press UP or DOWN button to change the value.
4. Press MODE button to confirm and continue to the next setting.
5. Settings order: Year > Month > Day > Weekday Language > 12/24-hours mode > Time zone offset
> > Hours > Minutes
6. Finally press the MODE button to save the settings and exit the setting mode.
9 Time zone setting
To set a different time zone, proceed as follows:
1. Press and hold MODE button for approx. 3 seconds to change to time setting mode.
2. Press the MODE button multiple times until the display shows the time offset 00 Hr.
3. Press UP or DOWN button to select the desired time deviation in hours (-23 up to +23 hours).
4. Finally press the MODE button to save the settings and exit the setting mode.
10 Alarm setting
1. Press the MODE button to switch to the settings mode for the alarm time. "AL" is displayed instead
of the seconds.
2. Press the UP button to enable or disable the alarm. When the alarm is enabled, the symbol ap-
pears on the display.
3. Press the MODE button for about 3 seconds to enter the settings mode for the alarm time. The
first value to be set flashes.
4. Press UP or DOWN button to change the value.
5. Press the MODE button to confirm and switch to the next setting.
6. Settings sequence: Hours > Minutes > Snooze Interval (01-20 minutes)
7. Finally, press the MODE button to save the settings and exit settings mode.
8. When the alarm sounds, press any button to stop the alarm.
11 Snooze function
1. When the alarm sounds press the SNOOZE/LIGHT touch sensor at the top of the device or the
SNOOZE/LIGHT button on the back to activate the snooze function. The alarm will sound again in
5 minutes.
2. Press any other button when the alarm sounds to interrupt the alarm until the alarm time will be
reached again.
3. The alarm will be turned off automatically if no button is pressed within 2 minutes.
4. The default interval of 5 minutes for the snooze function can be changed in the alarm setting
mode.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bresser 7000024 ClimaTemp Hygro DLX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bresser 7000024 ClimaTemp Hygro DLX in the language / languages: English, German as an attachment in your email.

The manual is 0.53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bresser 7000024 ClimaTemp Hygro DLX

Bresser 7000024 ClimaTemp Hygro DLX User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info