Manual Bresser 70-50200 (page 39 of 52) (English, German, French, Italian, Spanish)

632833

Zoom out

Zoom in

1/52

4.5 DISPLAYING THE TEMPERATURE FROM THE

REMOTE SENSOR

Static Display: Press the CHANNEL button to select meas-

urements from different remote sensors (channel 1, 2 or 3).

Channel Auto-Scan Display: To enable an automatic scan

of all present channels, press and hold CHANNEL button

until the icon is displayed. The measurements from each

remote channel will be alternately displayed with a 5 sec-

onds viewing.

NOTE!

The channel auto-scan feature can be activated only if there

are more than one remote sensors operating and are set to

different channels.

4.6 VIEWING MAX/MIN READINGS

Press the MEM button to read the minimum temperature

of all sensors (indoor and remote) with the MIN, next MEM

press the maximum values with the MAX icon and then back

to the current values.

4.6.1 RESETTING MEMORIES

Press and hold the MEM button for 3 seconds to clear all

max/min memories.

4.7 MANUAL TIME and USER-DEFINED SETTINGS

To set the clock manually, make sure that the display shows

the normal time (not the ZONE time). You can change the

time display by a simple push on the MODE button. After

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bresser 70-50200 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bresser 70-50200 Manual

Product: