Manual Bresser 70-09993 Thermo-Hygrometer (page 18 of 52) (English, German, French, Italian, Spanish)

632898

Zoom out

Zoom in

1/52

- 18 -

FIRST OPERATION OF THE

THERMO-HYGROMETER

1. Open the battery compartment cover on the

back of the Thermo-Hygrometer.

2. Set the desired channel with the switch (D). If

you are using only one transmitter, please leave

the selection at „1“.

3. Insert 2 new UM-3 or „AA“ 1.5V batteries

observing correct polarity.

4. Use a pin to press the „RESET“ - button located

in the battery compartment.

5. Close the battery compartment cover and set

the unit in the desired location.

PLACEMENT TIPS:

Please observe the following guidelines to ensure

optimal operation of the device:

1. Assign each remote unit to it’s own channel.

2. Place the receiver unit (Weather station) and re-

mote unit (thermo-hygro sensor) within 1 meter

to each other and enable the manual search for

available signals of all remote units on the main

unit (Weather station, not included) Do this by

pressing the [▼] button on the back side of

your weather station. Wait until the measured

value appears on the display.

Please, tell me how to tune a remote unit Bresser 70-09993 (5 channels 433MHz) with a receiver unit weather station Bresser 95-01200 (3 channels 433MHz)? Witch channel must be chosen in each unit? Submitted on 8-4-2018 at 00:41
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bresser 70-09993 Thermo-Hygrometer in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bresser 70-09993 Thermo-Hygrometer Manual

Product: