632835
28
Zoom out
Zoom in
Previous page
1/40
Next page
28
2. The main unit should not stand close to metal window frames.
3. Please do not using other electrical products, such as headphones
or speakers, operating on the same signal frequency (433.92 MHz).
4. Electrical devices operating on the same signal frequency may also
cause interference. This can include devices used in the neighbor-
hood as well.
Main unit channel setting
1. The main unit can be connected with a maximum of up to 3 trans-
mitters.
2. Press the CHANNEL button to switch between the displays of each
channel. The main unit will display the information of the correspond-
ing transmitter. When the symbol
is displayed near the channel
information the automatic display rotation is activated. The display
changes between the information of the connected remote sensors
every 10 seconds.
NOTE!
Der Wechsel zwischen den einzelnen Kanälen über die CH-Taste kann
nur dann genutzt werden, wenn tatsächlich mehrere Außensensoren
mit der Basisstation verbunden sind. Sonst ist diese Funktion deak-
tiviert.
Automatic time setting
1. After the batteries are installed. The clock will automatically search
for the radio signal. It takes about 3-5 minutes to finish this process.
2. If the radio signal is received, the date and time will be set automat-
ically and the radio control signal icon
turns on.
If the clock fails to receive the time signal, go ahead with the following
steps:
1. Press UP and DOWN button at the same time for approx. 3 seconds
to initialize radio signal reception manually.
2. If the time signal receiving fails again, the time can be set manually.
Manual time setting and user-defined settings
1. In normal display mode, press and hold the MODE button for approx
2 seconds to enter settings mode. ‘24Hr’ will flash.
2. Press the UP or DOWN button to change the value.
3. Press the MODE button to confirm and go to the next value to be
changed.
4. The setting order is 24/12 hour mode >> °C/°F >> hPa/inHg >>
time zone (-2 to +2 hours) >> hours >> minutes >> year >> month >>
date >> language (GE = german / EN = english / IT = italian / FR =
french / SP = spanisch) >> save and exit.
5. If there is no operation for 20 seconds, the existing setting will be
saved and the device returns to normal display mode. You can also
press the MODE button again to confirm and exit.
ANL7007500_7007501DEGB1115BRESSER.indd 28 14.12.15 13:27
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bresser 70-07501 TemeoTrend at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bresser 70-07501 TemeoTrend in the language / languages: English, German as an attachment in your email.

The manual is 4,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bresser 70-07501 TemeoTrend

Bresser 70-07501 TemeoTrend User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info