632835
25
Zoom out
Zoom in
Previous page
1/40
Next page
25
GB
the main unit and the remote sensor at other places. Sometimes all it
takes is a relocation of one of these components of a few inches!
Though the remote unit is weather proof, it should be placed away
from direct sunlight, rain or snow.
POWER SUPPLY
Main unit
1. Open the battery compartment door.
2. Install 3 batteries (AA size 1.5V) strictly according to the polarities
shown.
3. Reinsert the battery compartment door.
Außensensor
1. Open the battery compartment door.
2. Install 2 batteries (AAA size 1.5V) strictly according to the polarities
shown.
3. Press the CH button until the desired transmission channel will be
displayed (CH1 to CH3) (if only one remote sensor is connected, al-
ways select channel 1).
4. Reinsert the battery compartment door.
Low battery warning
When batteries need to be replaced the respective low battery indi-
cator
will be shown near the indoor temperature display (batteries
for main unit) or near to the outdoor temperature (batteries for remote
sensor).
USING TABLE STAND OR WALL MOUNTING
The main unit has a removable table stand, which - when connected
- can support the unit on a flat surface. It is possible to remove the
stand and mount the unit on a wall using the recessed screw hole. The
same applies to the remote unit; it can be placed on a flat surface or
mounted on a wall using the recessed screw hole.
OPERATION
Receiving measurements and time signal
Once batteries are placed in the remote unit, it will start transmitting
temperature readings at roughly 45 second intervals. As soon as bat-
teries are installed in the main unit it will start searching for a signal
from the remote sensor for about 3 minutes. Upon successful recep-
tion of the signal, the outdoor temperature will be displayed on the
main unit. The main unit will automatically update its readings at about
45 second intervals.
ANL7007500_7007501DEGB1115BRESSER.indd 25 14.12.15 13:27
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bresser 70-07501 TemeoTrend at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bresser 70-07501 TemeoTrend in the language / languages: English, German as an attachment in your email.

The manual is 4,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bresser 70-07501 TemeoTrend

Bresser 70-07501 TemeoTrend User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info