632836
15
Zoom out
Zoom in
Previous page
1/24
Next page
15
When changing batteries always change batteries in the main
unit as well as all remote units and replace them in the correct
order, so the remote connection can be re-established.
If batteries are exchanged in only one of the devices (i.e.
the remote sensor) the signal can’t be received or can’t be
received correctly.
Note, that the effective range is vastly affected by building
materials and position of the main and remote units. Due to
external influences (various RC devices and other sources of
interference), the maximum distance can be greatly reduced.
In such cases we suggest to position the main unit and the
remote sensor at other places. Sometimes all it takes is a
relocation of one of these components of a few inches!
Though the remote unit is weather proof, it should be placed
away from direct sunlight, rain or snow.
POWER SUPPLY
Main station
1.
Put the DC power plug (Fig. 1, C) in the DC jack (Fig. 2, 18).
2. Push the RESET knob to initialize the automatic time signal
and remote sensor signal seanning.
3. Open the battery compartment covering carefully with a
coin (turn to arrow direction OPEN).
4. Insert 1 button cell (Typ CR2032, 3V) according to the
polarity marked in the battery compartment.
5. Close the battery compartment.
NOTE!
1. If no signals are received or the transmission is interfered,
‚---‘ will appear on the LCD.
2. Position the receiver and transmitter within the effective
transmission range: 30m in usual circumstances.
3. If the device is running on battery power, only a minimum
power supply is guranteed. The display is working on
lowest level, projection and color change function are not
available in low battery mode.
Remote sensor
1. Open the battery compartment covering carefully.
2. Install 2 batteries (AA size 1.5V) strictly according to the
polarities shown.
4. Reinsert the battery compartment door.
NOTE!
Once the channel is assigned to one transmitter, you can only
change it by removing the batteries or resetting the unit.
RECEPTION OF RADIO CONTROLLED TIME SIGNAL
The time and date are radio-controlled. The current time
DE
GB
FR
IT
ES
Garantie / Warranty
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bresser 70-07200 Temeo TB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bresser 70-07200 Temeo TB in the language / languages: English, German as an attachment in your email.

The manual is 1,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bresser 70-07200 Temeo TB

Bresser 70-07200 Temeo TB User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info