632899
51
Zoom out
Zoom in
Previous page
1/136
Next page
51
GB/IE
with steel reinforcements or certain concrete compositions, steel
bearers, etc.), please reduce the distance between the external
sensor and the base station.
• If external temperatures fall below 0°C, the battery power of the
external sensor diminishes and the radio transmission signal be-
comes weaker. In this case please reduce the distance between
the external sensor and the base station.
• If the base station does not display the external temperature but
only „- - - -“, it may be because the batteries in the base station
are too weak, meaning it is unable to receive the signals from the
external sensor. Replace the batteries with new ones.
• Interruptions to reception can also be caused by other household
equipment, TV and radio remotes, interfering transmitters or
external transmitters, etc. In this case only „- - - -“, „HHH“ or
„LLL“ can be seen on the display. If this occurs, press and
hold the down arrow button for approx. 5 seconds to start the
sensor scanning process. Then wait a few moments. The current
external temperature should be displayed again after the external
sensor‘s next transmission signal.
• Weak batteries in the base station Replace the batteries as soon
as the low battery symbol is displayed. Wait for approximately
5 minutes before inserting the new batteries. Do not touch the
battery contacts when inserting the batteries. This will reduce
the corrosion behaviour of the contacts and extend the life of the
batteries. When inserting the new batteries always make sure
the polarity is correct. After changing the batteries proceed as
described under section 1.3 „Commissioning“.
• Weak batteries in the external sensor Replace the batteries as
soon as the low battery symbol is displayed. When inserting the
new batteries always make sure the polarity is correct. The exter-
nal sensor must then be registered again. To do this proceed as
described under section 1.3 „Commissioning“.
• Incorrect temperature and humidity display. The temperature and
humidity display are affected by direct sunlight and rain respec-
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bresser 70-04110 TemeoTrend NBF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bresser 70-04110 TemeoTrend NBF in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info