632884

Bresser 70-00002 MyTime Travel Manual

17
Zoom out
Zoom in
Previous page
1/56
Next page
17
2. Install 2 batteries (AAA size 1.5V) strictly according
to the polarities shown.
3. Reinsert the battery compartment door.
Low battery warning
When it is time to replace the batteries, the respective
low battery indicator will be shown near to the
time display (batteries for main unit) or near to the
outdoor temperature (batteries for remote sensor).
USING TABLE STAND OR WALL MOUNTING
The main unit has a foldable table stand which can
support the unit on a flat surface. The remote unit also
can be placed on a flat surface or mounted on a wall
using the recessed screw hole.
OPERATION
Receiving measurements and time signal
Once batteries are placed in the remote unit, it will start
transmitting temperature readings at roughly 45 second
intervals. As soon as batteries are installed in the main
unit it will start searching for a signal from the remote
sensor for about 3 minutes. Upon successful reception
of the signal, the outdoor temperature will be displayed
on the main unit. The main unit will automatically update
its readings at about 45 second intervals.
Subsequently, the main unit will attempt to receive the
DCF77 radio signal. The reception symbol flashes.
When the time signal is received after 3-5 minutes,
the current time and date appear in the display. The
reception symbol will now be shown permanently in the
display. Date and time are automatically updated daily at
2:05 o’clock (CET) by the main unit.
Temperature and humidity
1. Press the DOWN button to switch the displayed
temperature between °C and °F.
2. Once the battery is installed, the main unit will start
displaying the interior measurement information.
The main unit will display the information from the
remote sensor for the first time approximately 3
minutes after the power supply was established.
3. There are 3 different icons to displaying the indoor
climate as below:
humidity is same or lower than 40%
humidity is same or higher than 70%
DE
GB
FR
IT
ES
Garantie / Warranty
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bresser 70-00002 MyTime Travel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bresser 70-00002 MyTime Travel in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info