Manual Bremshey Sprinter Control (page 3 of 52) (English, German, Dutch, French, Italian, Swedish, Spanish, Finnish)

655579

Zoom out

Zoom in

1/52

G B

O W N E R ' S M A N U A L

•

S P R I N T E R

•

Do not attempt any servicing or

adjustments other than those described

in this guide. Everything else must be left

to someone familiar with the maintenance

of electromechanical equipments and

authorised under the laws of the country in

question to carry out maintenance and repair

work.

•

The emergency brake can be used to stop

the flywheel immediately by pushing slightly,

to prevent any unwanted motion.

NOTE ABOUT

ASSEMBLING THE

EQUIPMENT

Start by unpacking the equipment. The

detailed assembly instructions can be

found at the back of this guide. Follow the

instructions in given order.

Before assembly, check the contents of the

package. If a part is missing, please contact

your dealer with the model, equipment serial

no. and spare part no. of the missing part.

You’ll find a spare part list at the back of this

guide. The hardware kit contents are marked

with * in the spare parts list. The directions

left, right, front and back are defined as

seen from the exercising position. Keep the

assembly tools, as you may need them e.g.

for adjusting the equipment. Note that two

people are needed for the assembly.

The packaging includes a silicate bag for

absorbing moisture during storage and

transportation. Please dispose of the bag

once you have unpacked the equipment.

Allow at least 100 cm of clearance around

the equipment. We also recommend opening

the package and assembling the product on

a protective base.

SAVE THIS INSTRUCTION MANUAL

ADJUSTMENTS

SEAT ADJUSTMENT

Set the right height for you; the basic rule is

that the arch of the foot reaches reaches the

the pedal at its lowest point with the leg almost

straight. Adjust the seat height by loosening

the seat locking knob on the side. Hold on to

the seat with one hand and, using your other

hand, pull the locking knob outwards in order

to enable free seat tube movement upwards

and downwards. Once the height is right, let go

of the knob and the seat locks into place. Turn

the locking knob clockwise to tighten.

NOTE! Always make sure that the locking knob is

properly fastened before starting to exercise!

To adjust horizontal seat position forward and

back, loosen the locking knob under the seat

by turning it clockwise. Adjust the seat to the

desired position and tighten the locking knob

by turning it counter-clockwise.

NOTE! Do not pass the maximum border for the

seat. This can cause damage to the machine.

HANDLEBAR SETUP

Loosen the locking knob on the side of the

handlebar support then loosen the knob on the

front side of the handlebar, and find the right

position. Tighten the locking knobs. The design

of the handlebar allows you to exercise either

in an upright position or with the upper body

leaning forward. Remember, however, always to

keep your back straight.

To assemble the bottle holder, put the bottle

holder on the mounting bracket with the 2

bolts. (with supplied allen key)

To assemble the monitor, first put in the

batteries, then connect the sensor wire. And

finally click the monitor onto the bracket on the

handlebar (see also assembly instructions on

page 43)

NOTE! Always make sure that the locking knob is

properly fastened before starting to exercise!

ADJUSTMENT OF SUPPORT FEET

If the equipment is not stable, adjust the

adjustment screws below the support feet as

necessary.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bremshey Sprinter Control in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bremshey Sprinter Control Manual

Product: