Manual Breezy RubiX 2 XL Komfort (page 19 of 80) (English, German, Dutch, French, Italian)

713920

Zoom out

Zoom in

1/80

RubiX

Options – Crutch holder

CRUTCH HOLDER

This device permits crutches to be

transported directly on a wheelchair. It has a

Velcro loop to fasten crutches or other aids

(Fig. 45).

CAUTION:

Never try to use or even remove the

crutches or other aids while moving.

Options - Therapy table

THERAPY TABLE

The tray provides a flat surface for

most activities. Before using a tray, it

first has to be adjusted to the width of

the seat by an authorised dealer. The

user must be sitting in the wheelchair

during this adjustment (Fig. 46).

Options – Push handles

HEIGHT-ADJUSTABLE PUSH

HANDLES

These handles are secured with pins

to prevent them from sliding out

unintentionally. By releasing the

release lever (1) you can adjust the

push handles to a height which suits

you. After any adjustment to the

height of the push handles, pull the

release lever (1) until it is tight (Fig. 44).

CAUTION:

If the lever is not secure, injuries could result when lifting over

obstacles.

Fig.44

Fig.45

Fig.46

Options - Stabilising Bar

RECLINER STABILISING BAR

Open star-knob (1) and swing the

stabilising bar (2) out of the way

before folding the chair.

To reinstate the wheelchair, reverse

the above procedure, (Fig.47).

DANGER!

• Before using the wheelchair

ensure that the stabiliser bar and

star-knobs are in place and are

tightened correctly.

• Never use the stabiliser bar to lift the chair!

FOLDING STABILISING BAR

This bar is used to stabilise the

backrest. To be able to fold the

wheelchair, the stabilising bar must be

pushed downwards in the middle (1).

To completely unfold the wheelchair,

the carrying handle (2) must be pulled

upwards, (Fig.49).

Fig.49

SWINGAWAY STABILISING BAR

This bar is used to stabilise the

backrest. To be able to fold the

wheelchair, the release lever (1)

must be pushed inwards and the

stabilising bar must be flipped

downwards. When unfolding the

wheelchair, please make sure that

the stabilising bar is locked into

position (Fig. 48).

TRANSIT WHEELS

Transit wheels should be used wherever your wheelchair would be

too wide if the rear wheels were used (e.g., in

airplanes, buses, etc.). After the rear wheels have been

removed with the aid of the quick-release axles, the

transit wheels can immediately be used to continue

riding. The transit wheels are mounted so that they

are approx. 3 centimeters above the ground when not

in use. They are thus out of the way when riding,

transporting or when tipping to pass over obstacles

(e.g., kerbs, steps, etc.) (Fig. 52).

CAUTION:

Your wheelchair does not have any wheel locks when

the transit wheels are being used.

Options – Transit wheels

Options – One-hand operation

ONE-HAND OPERATION

To move the wheelchair in a straight

line, both hand wheels must be

operated. If the wheelchair is to be

folded up, remove the pull-off bar by

pushing it inwards (Fig. 53).

CAUTION:

To avoid injury, always make sure

that all connections are firmly in place.

Options – Headrests

HEADRESTS

The headrest can be raised and moved

both forwards and backwards. To do this,

simply loosen the screw, adjust the

headrest to the desired position, and

tighten the screw (see the section on

torque) (Fig. 50).

COMFORT HEADREST

For adjusting the height open knob

and position the headrest in the

desired height. Finally tighten the

knob again, (Fig.51).

Fig.52

Fig.53

Fig.47

Fig.48

Fig.50

Fig.51

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Breezy RubiX 2 XL Komfort in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 6,2 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Breezy RubiX 2 XL Komfort Manual

Product: