517808
12
Zoom out
Zoom in
Previous page
1/20
Next page
Programming in auto mode
(1)...... Press the button.
Press the button
until AUTO is displayed.
(3)...... Press the button
and the ‘starts in’ time will
start flashing. Use the
or button to select
the hour.
(4)...... Press again.
The delayed stop time can only be
programmed once the cooler is
ON. This is ideal if you are going
to bed but don’t want to turn the
cooler off straight away. To
program the delayed time in which
you want the cooler to stop use
the following sequence:
(1)......Select the button
and the ‘stops in’ time will start
flashing. Use the and
buttons to select the
desired off time.
(2)...... Press again.
(2)......
DELAYED START OR STOP
The cooler can be programmed to
start at a specific time or stop at a
specific time.
The delayed start time can only be
programmed when the cooler is OFF.
To program the cooler to start in a
certain amount of hours use the
following sequence:
(1)...... Press the button.
(2)...... Press the button
until MAN is displayed on
the screen.
(3)...... Press the or
button until the desired fan
speed is displayed by the
bars in the middle of the
screen.
(4)...... Press the button to
set either COOL or VENT.
(5)...... Press the button and
the ‘starts in’ time will start
flashing. Use the and
buttons to select
the desired time.
(6)...... Press again.
Programming in manual mode
ILL1119-B
ILL1118-B
ILL1117-B
®
12
Evaporative Cooler
SERVICE MODE
When a fault has been
recognised by the wall control the
word SERVICE flashes on the
screen.
When SERVICE is displayed it
maybe necessary for you to
phone the Service number
located on the back of this
manual. However, before doing
so, turn the wall control OFF. You
will notice a number flashing at
the bottom of the screen. This
number indicates the reason for
requiring service.
Please write this number down,
then push the button to
turn the cooler back on. If after a
short time SERVICE is again
shown on the display, turn the
wall control OFF and check if the
flashing number is the same. If it
is check the following possible
problems. However, we do
suggest that any checks be
carried out by an authorised
dealer or service agent.
Service
ILL1120-B
Service
ILL1121-B
If ‘02’ is displayed
If ‘04’ is displayed
(1)......Check that the water supply
tap to the cooler is turned
on.
(2)......Check that your local water
authority haven’t temporarily
disconnected the water in
your area.
(1)...... If your cooler is fitted with a
drain valve, check that the
drain is not blocked.
If these do not fix the problem then
contact your Dealer or the Service
number on the back of this manual.
You will need to quote the flashing
number that you wrote down.
DRAIN MODE
(Cooler switched OFF)
Pressing the and
buttons at the same time for 2 seconds
will open the drain valve and empty the
water in the tank. The wall control will
display DR on the screen. Draining the
water will leave the tank clean and dry
until it is next used.
SEELEY INTERNATIONAL OWNER’S MANUAL 13
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Breezair Icon at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Breezair Icon in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info