517807
8
Zoom out
Zoom in
Previous page
1/20
Next page
ECONOMY MODE
DRAIN MODE
Selecting the ECONOMY mode limits
the maximum available cooling or
ventilation and reduces the power
used by up to 20%. The ECONOMY
function can be used in either AUTO
MANUAL modes. To select this
mode press the button so that
ECONOMY appears on the display.
Pressing the button opens the
drain valve in the cooler and empties
the water in the tank. This will leave
the tank clean and dry and turn the
cooler off.
If the cooler has not been used for 3
days or 3 hours, depending on the
DIP switch setting - see page 10, the
tank will automatically be drained to
ensure the system remains clean.
or
MANUAL
COOL
PM
FAN
SPEED
ECONOMY
ILL1125-A
DRAIN TANK
ILL1107-A
PRE - COOL MODE
Your remote control is designed to
allow for the saturation of the
coolers cooling pads before the
fan is switched on. This function,
referred to as PRE-COOL mode,
is enabled at DIP switch D (refer
to page 10). Once it is enabled the
cooler, will
operate as follows:
(1)...... If the tank is empty the
drain system will be closed. The
tank will then be filled.
(2)...... After 60 seconds of the
tank filling with water, the pump
will turn on and saturate the filter
pads.
(3)...... After the pump has been
running for 3 minutes the fan will
start.
During this operation the word
PRE-COOL will be displayed on
the remote control’s screen.
NOTE: PRE-COOL mode will not
be activated if VENT is selected
on the remote control or the cooler
is used again shortly after having
been turned off.
when first switched on,
MANUAL
COOL
PM
FAN
SPEED
ECONOMY
ILL1142-A
PRE-COOL
®
8
Evaporative Cooler
WATER MANAGER
®
The Breezair remote control is
fitted with the WaterManager
feature which automatically
monitors the quality of the water
in the cooler.
The WaterManager drains the
existing water in the cooler to
allow it to be replaced with fresh
water, only when it is needed.
Therefore, you may notice your
cooler draining water
occasionally. How often the
WaterManager performs this
operation depends upon the
quality of the water supply and
the rate of evaporation.
In areas of poor water quality, the
WaterManager will operate more
often as it tries to maintain the
optimum water quality in the
cooler. This maximises the
cooling effect and life of the
cooling pads.
The remote control has a unique
feature attached to the
WaterManager that allows you to
specify either high or low salinity
settings. The low salinity setting
is used in specific circumstances
only. We recommend talking with
your dealer before adjusting this
setting.
®
®
®
®
®
®
The high salinity setting is designed to
operate the cooler at a maximum safe
salinity level to maintain a normal
working life. It also results in a
minimum usage of water .
NOTE: High salinity outlet water should
not be used on salt sensitive grass or
plants. It has a high salt content.
The current WaterManager setting is
displayed by holding down the
button and pressing the button. The
setting can be changed by holding
down the button and pressing
either the or button for HI
and LO respectively.
The factory default WaterManager
setting is HI. For areas operating with
bore water, DIP switch F should be
switched to off (see page 10). This will
disable the salinity measuring circuit
and simply drain water from the tank
every 65 minutes of operation.
®
®
.......
MANUAL
COOL
FAN
SPEED
ECONOMY
ILL1111-A
MANUAL
COOL
PM
FAN
SPEED
ECONOMY
ILL1110-A
SEELEY INTERNATIONAL OWNER’S MANUAL 9
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Breezair EZ series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Breezair EZ series in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info