Parameter description Parameter value
Product name Infrared grill
Model BCIG 1800A BCIG 1800F
Rated voltage [V~]/
Frequency [Hz]
230/50
Rated power [W] 1,780
Protection class I
Timer range [min] 0-90
T 60-240
Dimensions [mm] 475x355x195
W 5.35
Dimension of the
interior of the device
[mm]
230x300x165
TECHNICAL D
The
and instructions to refer to <Infrared grill>. Do not use in
very humid environments or in the direct vicinity of water
tanks. Prevent the device from getting wet. Risk of electric
shock! Do not cover the ventilation openings!
2.
a) The plug must t the socket. Do not modify the
plug in any way. Using original plugs and matching
sockets reduces the risk of electric shock.
b) Avoid touching earthed elements such as pipes,
heaters, boilers and refrigerators. There is an
increased risk of electric shock if the earthed device
is exposed to rain, comes into direct contact with
a wet surface or is operating in a damp environment.
W
damage to the device and of electric shock.
c) Do not touch the device with wet or damp hands.
d) Use the cable only for its designated use. Never use it
to carry the device or to pull the plug out of a socket.
Keep the cable away from heat sources, oil, sharp
edges or moving parts. Damaged or tangled cables
increase the risk of electric shock.
e) If using the device in a damp environment cannot
be avoided, a residual current device (RCD) should
be applied. The use of an RCD reduces the risk of
electric shock.
f) Do not use the device if the power cord is damaged
or shows obvious signs of wear. A damaged power
cord should
the manufacturer ‘s service centre.
g) T
plug or device in water or other liquids. Do not use
the device on wet surfaces.
h) T
should not hang over the edge of the table top.
2.
a) Make sure the workplace is clean and well lit. A messy
or poorly lit workplace may lead to accidents. T
to think ahead, observe what is going on and use
common sense when working with the device.
b) Do not use the device in a potentially explosive
environment, for example in the presence of
ammable liquids, gases or dust. The device
generates sparks which may ignite dust or fumes.
c) If there are any doubts as to the correct operation
of the device, contact the manufacturer‘s support
service.
d) Only the manufacturer‘s service point may repair the
device. Do not attempt any repairs independently!
e) In case of re, use a powder or carbon dioxide
(CO2 )
electrical devices) to put it out.
f) Use the device in a well-ventilated space.
g) Regularly inspect the condition of the safety labels. If
the labels are illegible, they must be replaced.
h) Please keep this manual available for future
reference. If this device is passed on to a third party,
the manual must be passed on with it.
i) Keep packaging elements and small assembly parts
in a place not available to children.
EN USER MANU
8
EN
2.
a) Do not use the device when tired, ill or under the
inuence of
signicantly impair
b) The device may be used by children over 8 years of
age and persons with limited mental, sensory and
mental functions or lacking adequate experience and/
or knowledge, provided that they are supervised by
a person responsible for their safety or have received
instructions from that person on how to operate the
device safely and they understand the risks involved.
c) When working with the device, use common sense
and stay alert. T
using the device may lead to serious injuries.
d) T
make sure the switch is on the OFF position before
connecting to a power source.
e) The device is not a toy. Children must be supervised
to ensure that they do not play with the device.
f) NOTE: During operation, some elements of the
device become very hot – W
not touch these elements with your bare hands! T
out cooked meals using tongs or other kitchenware.
g) Keep all packaging material out of the reach of
children to avoid any risk of an accident (e.g.
suocation).
h) Do not lean against the appliance. Do not store
anything on the appliance.
i) Do not touch the housing or any other parts of the
appliance while it is turned on and shortly after
turning it o.
2.
a) Do not overload the device. Use the appropriate
tools for the given task. A correctly selected device
will perform the task for which it was designed better
and in a safer manner.
b) Make sure the plug is disconnected from the socket
before attempting any adjustments, accessory
replacements or before putting the device aside.
Such precautions will reduce the risk of accidentally
activating the device.
c) When not in use, store in a safe place, away from
children and people not familiar with the device who
have not read the user manual. The device may pose
a hazard in the hands of inexperienced users.
d) Keep the device in perfect technical condition.
Before each use check for general damage and
especially check for cracked parts or elements and
for any other conditions which may impact the safe
operation of the device. If damage is discovered,
hand over the device for repair before use.
e) Keep the device out of the reach of children.
f) Device repair or maintenance should be carried out
by qualied
This will ensure safe use.
g) T
not remove
any screws.
h) When transporting and handling the device between
the warehouse and the destination, observe the
occupational health and safety principles for manual
transport operations which apply in the country
where the device will be used.
9
The product satises the relevant safety
standards.
Read instructions before use.
The product must be recycled.
W
Applicable to the given situation (general
warning sign).
A
Protection class I device with a protective terminal.
A
Only use indoors.
i) Do not touch articulated parts or accessories unless
the device has been disconnected from the power
source.
j) Do not move, adjust or rotate the device in the
course of work.
k) Do not leave this appliance unattended while it is in
use.
l) Clean the device regularly to prevent stubborn grime
from accumulating.
m) Do not cover the air intake and outlet.
n) The device is not a toy. Cleaning and maintenance
may not be carried out by children without
supervision by an adult person.
o) Do not run the device when empty.
p) It is forbidden to interfere with the structure of
the device in order to change its parameters or
construction.
q) Keep the device away from sources of re and heat.
r) Do not overload the device.
s) Do not use this device for drying, heating or drying
out of objects.
t) Use kitchen utensils that are intended for use with
food and that will not scratch the appliance. Do not
use sharp and metal objects.
u) The device is not intended to be operated by an
external (remote) timer or remote control system.
v) Do not use charcoal
device.
w) This grill operates at high temperatures which may
cause burns.
x) Do not touch hot surfaces, parts or the inside of the
device during operation.
y) When gripping the grill plate or drip tray, use kitchen
gloves / heat-resistant protective gloves (etc.).
z) Before plugging the device into the mains, make
sure that the grill plate, drip tray and housing are
clean and dry.
aa) Before turning on the infrared grill, remove all
objects and
outside of the device.
bb) Do not place materials such as paper, cardboard,
plastic and the like on the device.
cc) Always turn o the device (click the temperature
control knob to the OFF position) after use and
before disconnecting the device from the power
supply.
dd) Do not use the infrared grill with damaged parts,
such as the power cord, power plug, grill plate, drip
tray etc., also when the device is damaged in any
other way and does not work properly.
ee) Do
not work properly. Devices that cannot be controlled
with switches or adjustment knobs are dangerous,
must not be operated and must be repaired.
T
trouble-free operation, use it in accordance with this user
manual and regularly perform maintenance tasks. The
technical data and specications in this user manual are
up to date.
LEGEND
1.
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed
and manufactured in accordance with strict technical
guidelines, using state-of-the-art technologies and
components. Additionally, it is produced in compliance
with the most stringent quality standards.
DO NO
THOROUGHL
USER MANUAL.
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details may
dier from the actual product.
The original operation manual is in German. Other
language versions are translations from German.
2.
A Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may
or serious injury or even death.
REMEMBER! When using the device, protect children
and other bystanders.
A Despite the safe design of the device
and its protection facilities and despite the use of
additional elements protecting the operator, there is
still
the device. When using the device stay alert and use
common sense.
22.10.2019
