716533

Breadman TR520 Manual

50
Zoom out
Zoom in
Previous page
1/68
Next page
48
DOUGH Recipes
. . . As Easy As 1 - 2 - 3
1. Add ingredients to the bread pan in the order listed. Refer to HELPFUL HINTS FOR BREAD &
DOUGH for measuring information. Place the bread pan in the Bread Maker.
2. Close the lid. Select DOUGH PROGRAM. Press START.
3. Remove the dough from the bread pan when the beeper sounds. Follow shaping and baking
instructions.
If you allow the dough to remain in the Bread Maker after the cycle is complete, it may over rise
and damage the machine.
Rising times for dough after it is shaped and placed in a baking pan will vary due to recipe,
temperature and humidity level of your kitchen. The optimum temperature of the room for rising is
80°-85°F/27°-29°C. Rising is the most essential feature in bread making. After the dough comes out of
the Bread Maker, the dough ferments and rises before punching and resting. The gluten becomes
pliable and elastic with a soft, smooth quality. Fermentation conditions gluten, develops flavor and
leavens the product.
Dough has doubled in bulk when an indentation remains after the tip of a finger is pressed lightly
and quickly into the dough. If the indentation springs back, cover and let rise a few more minutes and
check again. After punching down and dividing dough, cover and let rest 10 minutes. Resting allows
the gluten to relax and makes handling easier. Then shape the dough as desired.
Sometimes a double rising is beneficial especially for whole grain or 100% whole wheat bread. Let
the dough rise once, punch down, let rise again, punch down, let rest 10 minutes and shape.
CRUST TREATMENTS (use only with dough program)
Always allow optimum rising of shaped dough. Use a pastry brush to apply glaze. Bake as directed.
Egg Yolk Glaze — For shiny golden crust, mix 1 slightly beaten egg or egg yolk with 1tbs water or milk.
Egg White Glaze — For a shiny, chewy crust, mix 1 slightly beaten egg white with 1 tablespoon water.
Lightly Floured — Sprinkle enough flour onto work area so dough can be handled without sticking.
SHAPING ROLLS
Cloverleaf Rolls — Shape into 1/2 inch balls. Place 3 balls in each greased muffin tin and let rise until
double in size.
Crisscross Rolls — Shape into balls. Combine two of the balls and roll into a 1/8 inch thick square.
Cut strips 1/8 inch wide and place one strip across the top of each ball. Repeat this process, placing
the second strip in the opposite direction across the top of each ball.
Traditional Rolls — Shape into balls. For “pull apart” rolls, place dough balls with sides touching
in a baking pan. For “individual” rolls place dough balls 2 inches apart on a baking sheet.
Pan Sizes For Pull-Apart Rolls...
For a 1 LB. (9 rolls) recipe, use an 8 x 8 inch baking pan.
For a 1.5 LB. (18 rolls) recipe, use two 8 x 8 inch baking pans.
For a 2 LB. (24 rolls) recipe, use a 9 x 13 inch baking pan.
Breadman_TR520_IB_23-3-07 3/23/07 2:44 PM Page 50
… 50 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Breadman TR520 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Breadman TR520 in the language / languages: English as an attachment in your email.

The manual is 0,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info