545947
43
Zoom out
Zoom in
Previous page
1/51
Next page
GB
version 1.0ECopyright Bravilor Bonamat B.V.
29
7.3.8 Lengthening water
delivery time by setting
pauses
The default time required for making a full
container of coffee can be lengthened by setting
pauses. This is, for example, necessary when
very finely ground coffee or very soft water is
used. Then some more time is needed for the
water to go through the coffee filter, otherwise it
will overflow. The capacity is reduced. This is
indicated in %.
Default setting to 100%, so no pauses.
The setting range is between 100% and 50%,
to be set in 5% steps. After the setting, the
machine calculates the pause schedule itself.
It can, however, be set to when the first
pause should come.
The setting must be determined by
experience by making coffee.
The minimum amount that can be set for the
first pause is the volume of the filter cone
+25%.
Model Contents filter cone Minimum amount first
charge
B5 2 litres 2,5 litres
B10 4 litres 5,0 litres
B20 8 litres 10,0 litres
B40 15 liter 20,0 liter
Table 10 Minimum amount first charge
G
H
I
J
KLM
%
N
Fig. 35 Pause time 100%
D Press selection key (N.)until fig.35 appears
on the display.
D Press programming key (G.).
The position beside the programming key
starts flashing.
D Press selection key (M.) or (N.)to select the
desired programme.
The enter symbol appears on the display.
D Press confirmation key (L.) to confirm the
adjustment.
D Press programming key (I.).
TIP
This can only be done when the percentage
is not set to 100%.
D Press selection key (M.) or (N.) to select the
desired amount of the first charge.
The enter symbol appears on the display.
D Press confirmation key (L.) to confirm the
adjustment.
D Press selection key (N.)to go to the next
setting or press stop key (K.) to exit the
programming menu.
7.3.9 Setting drippingon time
When the hot water supply through the spray head
has stopped, it will take a while until the filter pan
also stops dripping. The time required for this
varies with different coffee brands and/or grinds.
Therefore this drippingon time can be changed.
The default setting is on 120 seconds.
The setting range is from 0 600 seconds in
10 seconds steps.
G
H
I
J
KLM
N
Fig. 36 Drippingon time
The drippingon time can be set as follows:
D Press selection key (N.)until fig.36 appears
on the display.
D Press programming key (G.).
The value beside the selection key starts
flashing.
D Press selection key (M.) or (N.)to select the
desired number of seconds.
The enter symbol appears on the display.
D Press confirmation key (L.).
The desired number of seconds has been
set now.
D Press selection key (N.)to go to the next
setting or press stop key (K.) to exit the
programming menu.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bravilor Bonamat B40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bravilor Bonamat B40 in the language / languages: English as an attachment in your email.

The manual is 1,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bravilor Bonamat B40

Bravilor Bonamat B40 User Manual - German - 53 pages

Bravilor Bonamat B40 User Manual - Dutch - 51 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info