545947
35
Zoom out
Zoom in
Previous page
1/51
Next page
GB
version 1.0ECopyright Bravilor Bonamat B.V.
21
7.3 The extended programming menu
Below a description is given of how users with
extended authority (principal), after having
entered the PIN code, can view and adjust all
settings. First read this section to see which
settings can be made.
TIP
The extended programming menu needs a
principal user PIN code.
Enter the principal user PIN code to access
the programming menu. The programme
starts in the carousel (fig.10 ) of the extended
users’ menu with § 7.3.1, ”Setting total
amount of water”.
When a wrong PIN code has been entered,
one should wait a while until the initial screen
reappears on the display. Enter the PIN
code again.
Press selection key (N.)to go clockwise to
the next setting (§ 7.3.2), also see fig.10 .
Press selection key (M.) to go counter
clockwise to the next setting (§ 7.3.14). By
pressing a selection key several times the
entire carousel can be browsed through
(fig.10 ).
The settings are described in the order of the
carousel, clockwise (fig.10 ).
On the display the value to be adjusted is
each time indicated by flashing.
When an enter symbol appears on the
display, the setting can be confirmed by
pressing the confirmation key (L.).
With the red stop key (K.) the changing of the
setting can be interrupted and cancelled. By
pressing again the red stop key (K.) the
programming is left and the programme returns
to the users’ menu (§ 7.1). The change is not
saved.
When after confirming a changed setting no
further changes are to be made, the
programming menu can be left by pressing the
stop key (K.). The changes are saved and the
programme returns to the users’ menu (§ 7.1).
When for 20 seconds no activities have taken
place in the programming menu, the
programme returns to the users’ menu
(§ 7.1). Nonconfirmed settings are not
saved.
When the symbol appears in the
menu, the setting can be set to zero by
pressing simultaneously both selection keys
(M.) and (N.).
7.3.1 Setting total amount of
water
The total amount of water to be delivered can be
adjusted, as always a certain amount of water
remains behind in the coffee filter. This amount
can differ by the use of different kinds of coffee
and grinds. The default setting is 6% extra water.
In table 3 the setting options are given:
Model Factory setting Setting range
B5 5,3 litres 4,8−5,8 litres
B10 10,6 litres 9,6−11,6 litres
B20 21,2 litres 19,2−23,2 litres
B40 42,4 litres 38,4−46,4 litres
Table 3 Adjusting total amount of water
G
H
I
J
KL
M
N
Fig. 20 Total amount of water
D After having entered the principal user PIN
code fig.20 appears on the display.
D Press programming key (J.).
The L with the associated value beside the
programming key starts flashing.
D Press selection key (M.) or (N.) to select the
desired extra amount of water (table 3 ).
The enter symbol appears on the display.
D Press confirmation key (L.) to confirm the
adjustment.
D Press selection key (N.)to go to the next
setting (§ 7.3.2) or press stop key (K.) to exit
the programming menu.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bravilor Bonamat B40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bravilor Bonamat B40 in the language / languages: English as an attachment in your email.

The manual is 1,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bravilor Bonamat B40

Bravilor Bonamat B40 User Manual - German - 53 pages

Bravilor Bonamat B40 User Manual - Dutch - 51 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info