545946
13
Zoom out
Zoom in
Previous page
1/51
Next page
GB
ECopyright Bravilor Bonamat B.V.
IX
version 1.0
Installation
D The maximum acceptable ambient temperature with which a good operation can be guaranteed is 40°C.
D Consider damage caused by freezing. Never place the machine in rooms in which the temperature
can drop below 0°C. After all, with normal use there will always be water in the machine.
D Do not turn over the machine, move it upright.
D Never install the machine in places where water is sprayed or sprinkled.
D Never install the machine in front of entrances, exits or passageways intended for emergency
services.
D Place the machine on a sufficiently solid, flat surface close to a water connection, water discharge
and an earthed electrical power outlet.
D Leave sufficient space at the back and front of the machine for maintenance and repair purposes.
D Connect the machine to a readily accessible, manually operated water tap, so that the water supply
can easily be turned off.
D Connect the machine to the electrical supply in such a way that the connection of all phases and
neutral can be easily disconnected . The minimum distance between the disconnected contacts
have to amount 3 mm at least.
D Ensure that the machine is correctly earthed.
D Always observe local rules and standards when installing this machine.
Use
D Inspect the machine before use and check for damages.
D Protect the machine against water and moisture. Do not allow the machine to become wet by
spraying and never submerge the machine in water.
D Keep the operating controls free from dirt and grease.
D Never use sharp objects to operate the push buttons.
D Note that during use some parts of the machine become very hot.
D Disconnect the electrical supply and the water supply when the machine will not be used for long
periods. Clean the machine following the instructions in chapter 5..
Maintenance and repairing failures
TIP
In this document a clear distinction is made between maintenance activities that can be carried
out by the daily user and activities which are exclusively reserved for users with limited authority
(operator) and especially trained users with more extensive authority (principal).
Repair and maintenance activities not included in this document are always reserved to service
mechanics.
D If the mains lead is visibly damaged, it has to be replaced by a qualified service technician.
D Observe the given maintenance intervals. Overdue maintenance can lead to high repair costs and
may cause guarantee claims to become invalid.
D Do not carry out any maintenance activities concerning the machine before having it protected
against unintentional coming into operation. In such cases disconnect the electrical supply.
D Never leave the machine during maintenance activities.
D For cleaning the machine only use the cleansing agent and descaler recommended by the
manufacturer.
D Always wear suitable facial protection and gloves while working with cleansing and descaling
materials. Wash your hands after using these materials.
D Prevent damage of the machine caused by spilled descaler solution. Remove spilled solution as
quickly as possible and follow the previously mentioned safety instructions.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bravilor Bonamat B20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bravilor Bonamat B20 in the language / languages: English as an attachment in your email.

The manual is 1,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bravilor Bonamat B20

Bravilor Bonamat B20 User Manual - German - 53 pages

Bravilor Bonamat B20 User Manual - Dutch - 51 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info