Manual Bravilor Bonamat B10 (page 35 of 51) (English)

545945

Zoom out

Zoom in

1/51

version 1.0ECopyright Bravilor Bonamat B.V.

7.3 The extended programming menu

Below a description is given of how users with

extended authority (principal), after having

entered the PIN code, can view and adjust all

settings. First read this section to see which

settings can be made.

TIP

− The extended programming menu needs a

principal user PIN code.

− Enter the principal user PIN code to access

the programming menu. The programme

starts in the carousel (fig.10 ) of the extended

users’ menu with § 7.3.1, ”Setting total

amount of water”.

− When a wrong PIN code has been entered,

one should wait a while until the initial screen

re−appears on the display. Enter the PIN

code again.

− Press selection key (N.)⇑ to go clockwise to

the next setting (§ 7.3.2), also see fig.10 .

− Press selection key (M.) ⇓ to go counter−

clockwise to the next setting (§ 7.3.14). By

pressing a selection key several times the

entire carousel can be browsed through

(fig.10 ).

− The settings are described in the order of the

carousel, clockwise (fig.10 ).

− On the display the value to be adjusted is

each time indicated by flashing.

− When an enter symbol ↵ appears on the

display, the setting can be confirmed by

pressing the confirmation key (L.).

− With the red stop key (K.) the changing of the

setting can be interrupted and cancelled. By

pressing again the red stop key (K.) the

programming is left and the programme returns

to the users’ menu (§ 7.1). The change is not

saved.

− When after confirming a changed setting no

further changes are to be made, the

programming menu can be left by pressing the

stop key (K.). The changes are saved and the

programme returns to the users’ menu (§ 7.1).

− When for 20 seconds no activities have taken

place in the programming menu, the

programme returns to the users’ menu

(§ 7.1). Non−confirmed settings are not

saved.

− When the symbol appears in the

menu, the setting can be set to zero by

pressing simultaneously both selection keys

(M.)⇓ and (N.)⇑.

7.3.1 Setting total amount of

water

The total amount of water to be delivered can be

adjusted, as always a certain amount of water

remains behind in the coffee filter. This amount

can differ by the use of different kinds of coffee

and grinds. The default setting is 6% extra water.

In table 3 the setting options are given:

Model Factory setting Setting range

B5 5,3 litres 4,8−5,8 litres

B10 10,6 litres 9,6−11,6 litres

B20 21,2 litres 19,2−23,2 litres

B40 42,4 litres 38,4−46,4 litres

Table 3 Adjusting total amount of water

Fig. 20 Total amount of water

D After having entered the principal user PIN

code fig.20 appears on the display.

D Press programming key (J.).

− The L with the associated value beside the

programming key starts flashing.

D Press selection key (M.)⇓ or (N.)⇑ to select the

desired extra amount of water (table 3 ).

− The enter symbol ↵ appears on the display.

D Press confirmation key (L.) to confirm the

adjustment.

D Press selection key (N.)⇑ to go to the next

setting (§ 7.3.2) or press stop key (K.) to exit

the programming menu.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bravilor Bonamat B10 in the language / languages: English as an attachment in your email.

The manual is 1,19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bravilor Bonamat B10

Bravilor Bonamat B10 User Manual - German - 53 pages

Bravilor Bonamat B10 User Manual - Dutch - 51 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bravilor Bonamat B10 Manual

Product: