598121

Braun Vitalscan BBP2200 Manual

6
Zoom out
Zoom in
Previous page
1/199
Next page
8
9
1 2
!
3.
7 Sec.
1 2 3
Average & memory functions
Your VitalScan 3 blood pressure monitor will automatically store 90 measurements
(VitalScan 1 model: 10 measurements). Storing is done automatically after each
completed measurement. The memory is nonvolatile. This means that you will not lose
stored data when changing batteries. However, the memory can be cleared manually.
See Deleting all measurements on page 9.
The VitalScan 3 model features an Average function to display the average
reading of the last three measurements.
Note: Average readings feature is NOT available in the VitalScan 1 model.
Recalling average readings (VitalScan 3 only)
1. To recall average readings, press
button.
The average of the 3 last readings will display
along with average icon
.
2. To exit, turn device off by pressing
button.
Recalling stored readings (VitalScan 1 and VitalScan 3)
1. Press memory button
once for average of existing memories (this step is for
VitalScan 3 only. See Recalling average readings above.) Then press
button
again. Memory icon
will appear and a number will briefl y appear in the
pulse fi eld. This number indicates which memory is being recalled. Then, the
recalled measurement will display.
2. Repeatedly pressing the
button will call up one by one all stored readings.
The number of the memory will appear fi rst, followed by the measurement.
3. To exit the memory mode, press the
button.
Deleting all measurements
IMPORTANT: Before proceeding to clear all the memory, make sure you don’t have
to make reference to the readings in the future.
1. In shut off mode, press
button for at least 7 seconds until CL appears
in display.
2. When you release the
button, CL will fl ash.
3. Press the
button one more time and 3 short beeps will sound, CL will
disappear which indicates all stored readings have been deleted.
Battery charge indicator
Batteries almost discharged
When the batteries are approximately 75% used the
battery symbol will fl ash. The monitor will continue to
measure reliably, but new batteries should be obtained.
Batteries discharged—replacements required
! When the batteries are dead, the battery symbol
will fl ash empty, display will go blank and 3 beeps will
sound. You cannot take any further measurements
and must replace the batteries.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Braun Vitalscan BBP2200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Braun Vitalscan BBP2200 in the language / languages: All languages as an attachment in your email.

The manual is 22,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info