598120

Braun Vitalscan BBP2000 Manual

8
Zoom out
Zoom in
Previous page
1/199
Next page
12
13
* If this or any other problem occurs repeatedly, please consult your doctor.
Error Description Potential cause and remedy
«Hi» Pulse or cuff pressure
too high
The pressure in the cuff is too high (over
300 mmHg) OR the pulse is too high
(over 200 beats per minute). Relax for 5
minutes and repeat the measurement*.
«LO» Pulse too low The pulse is too low (less than 40 beats
per minute). Repeat the measurement*.
Readings from repeated
measurements diff er
considerably.
Blood pressure is a
fl uctuating value.
For healthy adults, deviations
of 10 to 20 mmHg are
possible.
none
Cuff is not
properly fi tted.
Ensure that the monitor is
fi tted as follows:
- on the palm side of your wrist
- approx. 2 cm away from
palm line
Readings were not
consistently taken at heart
level.
For each measurement, hold the
monitor at heart level.
Talking, coughing, laughing,
moving etc. when measuring
will infl uence the reading.
While measuring, relax, keep still, do not
move or speak.
Error Description Potential cause and remedy
Batteries are low Insert new batteries
Batteries are dead Insert new batteries
«ERR 1» Signal too weak The pulse signals on the cuff are too weak.
Re-position the cuff and repeat the
measurement.*
«ERR 2» Error signal During the measurement, error signals were
detected by the cuff , caused for instance by
movement or muscle tension. Repeat the
measurement, keeping the arm still.
«ERR 3» No pressure in the cuff An adequate pressure cannot be generated
in the cuff . A leak may have occurred. Check
that the cuff is correctly connected and is
not too loose. Replace the batterries
if necessary. Repeat the measurement.
«ERR 5» Abnormal result The measuring signals are inaccurate and
no result can therefore be displayed. Read
through the checklist for performing
reliable measurements and then repeat the
measurement.*
What to do if ...
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Braun Vitalscan BBP2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Braun Vitalscan BBP2000 in the language / languages: All languages as an attachment in your email.

The manual is 22,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info