704216

Braun ThermoScan PRO 4000 Base Station - 6021 Manual

7
Zoom out
Zoom in
Previous page
1/26
Next page
7
Connecting
Connect the station with the mains only via the low
voltage adapter. The green connection indicator will
light up, showing that the station is ready for use.
Charging
When the PRO 4000 Thermometer is not in use it
should be stored – in its protective cover – in the
Base Station. When placed into the station, the
thermometer will give a short beep and the yellow
charging indicator will light up.
The yellow light indicates that the thermometer‘s
batteries are charging. When the batteries are fully
charged, the yellow light will go out. If it comes on
again later on, this indicates that the batteries are
being recharged to maintain their full capacity.
When in use, the thermometer’s display may show
«RET» and the battery symbol. This means it has to
be returned to the station for charging.
Care and Cleaning
Disconnect the Base Station from electrical outlet.
Use a soft, dry cloth to clean the Base Station. Do not
use abrasive cleaners. Never submerge this device in
water or any other liquid. Store in a dry location free
from dust and contamination and away from direct
sunlight.
Anti-theft function
The PRO 4000 Thermometer is equipped with an
anti-theft function which requires returning the ther-
mometer to the Base Station within a pre-selected
time. If this time is exceeded, the thermometer will
be locked.
When leaving the factory, the anti-theft function of
the PRO 4000 is turned off. Below are details to set
the function and time period:
• Put the thermometer into the station and wait for
the long confirmation beep.
• Press the start-button on top of the thermo-
meter and keep it pressed while you take the
thermometer out of the station.
6021361_Pro4000_Base Seite 7 Freitag, 6. Juli 2007 10:11 10
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Braun ThermoScan PRO 4000 Base Station - 6021 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Braun ThermoScan PRO 4000 Base Station - 6021 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info