Manual Braun TexStyle 9 - 12790000 - SI 9188 (page 11 of 103) (All languages)

695776

Zoom out

Zoom in

1/103

(A) Start ironing

Filling the water tank

• Make sure that the appliance is switched

off and unplugged.

• Fill the water tank with tap water by

holding the iron slightly inclined, taking

care not to exceed the “max” level. If you

have extremely hard water, we recom-

mend that you use a mixture of 50 % tap

water and 50 % distilled water.

• Attention: Never use distilled water

exclusively. Do not add any additives (e.g.

starch). Do not use condensation water

from a tumble dryer.

Ironing with steam

• Place the iron on its heel rest (9) and

plug in.

• The iron will start to heat up and the

temperature control LED (7) on the iron

will blink.

• Once the temperature has been reached,

the temperature control LED turns

permanently on. Thanks to the ultimate

iCare technology, it is possible to iron

with one temperature setting, which is

perfectly suitable for all garments, without

damaging even delicate garments.

Steam options:

• Continuous steam (normal)

Select the steam quantity by turning the

steam regulator (4) in a range from «1» to

«6». We recommend a medium steam

setting for regular ironing. Only when

ironing tough fabrics like linen, thick

cotton or jeans it is recommended to use

the maximum steam setting.

Note: While ironing, do not turn the steam

regulator beyond setting «6».

• Continuous steam (turbo)

When the steam regulator is positioned

anywhere between «0» and «6» it is

possible to activate the turbo function by

pressing the turbo steam button (5) in

order to emit the highest steam output

and remove stubborn creases.

Press the turbo steam button for not more

than 30 seconds.

• Steam shot

Prior to use, press the steam shot trigger

(6) 3 to 4 times to activate it.

• For a powerful boost of steam, press the

steam shot trigger at intervals of a few

seconds.

• It is possible to use the steam shot

function by holding the iron in a vertical

position and pulling the steam shot

trigger. This is useful for removing creases

from hanging clothes, curtains etc.

Spray function

The spray function (3) produces a fine mist

that evenly moistens the fabric and makes it

easier to iron out creases on very tough

textiles.

Dry ironing

Set the steam regulator (4) on position «0»

(= steam off).

3D soleplate

The unique round shape of the 3D soleplate

ensures best gliding results on difficult parts

(e. g. buttons, pockets etc.) and in all

directions – even backwards.

(B) Auto off

For safety and reduced power consumption,

the auto-off function is automatically

activated when the iron is positioned

horizontally on its soleplate for about 1

minute or vertically on its heel rest for about

8 minutes.

• When the iron is in the auto-off mode the

temperature control LED (7) is blinking.

• To turn the iron on again, just move it

forward.

• Before start ironing again wait until the

temperature control LED is turned on.

• Unplug the iron and empty the water tank.

• Let the iron cool down before storing.

(D) Descaling

Preparation

1. Set the steam regulator (4) on position

«0» (= steam off).

2. Fill the water tank.

3. Plug in.

4. Wait until the temperature control LED

(7) turns permanently on and unplug the

iron. Hold the iron over the sink.

5. Turn the steam regulator clockwise

beyond steam stetting «6». When you

hear a click pull it out vertically until the

end of the spring appears. It must not be

removed completely.

Self clean

6. Move the appliance over the sink. Hot

water and steam will come out from the

soleplate along with the calc particles

from the steam chamber. Repeat 1.-6.

DLB253492_5712710611_SI9_UI_INT.indb 9 21.12.16 10:09

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Braun TexStyle 9 - 12790000 - SI 9188 in the language / languages: All languages as an attachment in your email.

The manual is 3,6 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Braun TexStyle 9 - 12790000 - SI 9188 Manual

Product: