Manual Braun Silk Expert Pro 3 PL3230 (page 16 of 88) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

790288

Zoom out

Zoom in

1/88

2. Press and hold the treatment button (5). The

device will begin to flash. 2. Press and instantly release the treatment

button (5). The device will emit a flash.

3. Move the device slowly and continuously from

the bottom to the top of the treatment area.

Make sure to always keep full skin contact so

that the device flashes continuously.

3. Lift off the device and place it onto the next

adjacent spot to be treated. Wait for the power

bars to show white LEDs. Then press and

release the treatment button.

Once the gliding stroke is completed, lift the

device off the treatment area. Repeat steps 1-3 to

treat the next adjacent area in a parallel stroke.

Continue treatment spot by spot until you have

completed the entire area you wish to treat.

Make sure you avoid missed areas by placing the treatment window directly next to the previously treated

spot without leaving any space between treated areas.

If you feel intense pain, stop treatment immediately and consult your physician before using the device again.

Treatment head(s)

While the standard head (10) can be used on all areas, it is ideal for efficiently

treating large areas, e.g. legs.

The precision head (11) (not with all models) has been specifically designed

for small, curvy, hard to reach areas, e.g. face for females, bikini line, underarms,

knee, shin, ankle. With the precision head attached, the flashing sequence is slower.

How to treat the face (females only)

•Before treating the face, make sure you have done a patch test. Remove any visible hair and cosmetics,

lotions and creams from the area you wish to treat.

•Before pressing the treatment button, close your eyes or look away to avoid the bright light. Avoid

treating the same area twice as this may increase the chance of producing adverse reactions.

•When treating the upper lip area, a void contact with the lips and the nostrils. The central area below the

nostrils might be sensitive.

•Do not use on permanent / semi-permanent lip liner on the lip margin.

•TIP: You can press your lips together to ensure that the light does not activate on the upper lip itself.

•Hair growth under the chin can be denser and coarser. This can sometimes lead to slight skin reddening

following a treatment. This redness is temporary and should completely disappear after 24 hours.

NOTE:

•If redness or a burning sensation occurs and lasts for several minutes, apply a cool cloth/pad to soothe

the area.

•If any pigment changes in the skin, e.g., lightening or darkening, are observed, stop using the device.

Seek medical advice to determine the cause which may be due to an underlying medical condition.

Treatment plan

Start-up phase 1 treatment per week (4-12 weeks)

Maintenance treatment continue treating to your needs, e.g.

every 1-2 months.

The typical hair growth cycle varies between individuals and could take up to 16 months depending on

body area (underarm, lower leg, bikini area). Since only hairs in their growing phase are susceptible to

treatment with light, it is important to do multiple treatments to achieve continuously smooth skin. For this

reason, we recommend a start-up phase with one treatment per week over a period of 4 -12 weeks.

In case you no longer see hair growing, you do not need to complete the full 12 weekly treatments. You can

switch to the maintenance treatments.

91584520_Victoria_Pro3_Euro_01.indd 1691584520_Victoria_Pro3_Euro_01.indd 16 15.06.20 13:0615.06.20 13:06

P&G RELEASE 06/18/2020 11:19:24 AM Printed 2020-06-18 Page 20 of

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Braun Silk Expert Pro 3 PL3230 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5.85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Braun Silk Expert Pro 3 PL3230 Manual

Product: