428395
11
Zoom out
Zoom in
Previous page
1/71
Next page
12
• Repeat cooling and epilating until com-
pletion.
While epilating, please ensure your skin
is dry.
Important:
Apply cooling glove to the
same area for no longer than 2 minutes.
Keep away from sunlight. Do not use gel
p
ack when damaged. Dispose of in house-
hold waste.
Do not use if you are hypersensitive,
allergic to the cold, or if your skin suffers
from sensory disturbances, when suffer-
ing from cardiac diseases or arterial
circulatory disorders.
Preparing the appliance
Before starting off, thoroughly clean the
epilation head you want to use (
B or b).
To remove the epilation head, press the
release buttons
3 on the left and right
and pull it off.
• Click the desired head into place:
Choose the starter epilation head with
the white barrel head
b if you are
epilating for the first time or if you have
very sensitive skin.
– Once your skin is used to epilation,
you may switch to the lilac standard
epilation head
B which allows a more
efficient and faster epilation thanks to
its greater number of tweezers.
• Make sure that the attachment
1 is in
place.
• Plug the cord connector
6 into the
socket
5 and plug the transformer plug
7 into an electrical outlet.
C How to epilate
1 To turn on the appliance, slide switch
4 to setting «2»
(«2» = normal speed,
«1» = reduced speed).
2 Rub your skin to lift short hairs.
For optimal performance, hold the
appliance at a right angle (90°) against
your skin and guide it without pressure
against the hair growth, in the direction
of the switch. Both rollers of the 4-way
moving pain softener should always be
kept in contact with the skin, allowing
the pulsating movements to stimulate
and relax the skin for a gentler epilation.
3 Leg epilation
Epilate your legs from the lower leg in
an upward direction. When epilating
behind the knee, keep the leg stretched
out straight.
4 Underarm and bikini line epilation
Use tests monitored by dermatolo-
gists have revealed that you can also
epilate the underarm and the bikini line.
Please be aware that these areas are
particularly sensitive to pain. With
repeated usage the pain sensation will
diminish.
Before epilating, thoroughly clean the
respective area to remove residue (like
deodorant). Then carefully dab dry with
a towel. When epilating the underarm,
keep your arm raised up and guide the
appliance in different directions.
Cleaning the epilation heads
5 After epilating, unplug the appliance
and clean the epilation head used:
First take off the 4-way moving pain
softener
1 and brush out the rollers.
6 Thoroughly clean the tweezer element
with the cleaning brush and also with
alcohol. While cleaning, you can turn
the tweezer element manually.
To remove the epilation head, press the
release buttons
3 on the left and right
and pull it off.
7 Give the top of the housing a quick
clean with the brush. Place the epilation
head and the 4-way moving pain
softener back on the housing.
5356434_2270_P6-76 Seite 12 Montag, 9. September 2002 1:18 13
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Braun silk-epil eversoft 2270 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Braun silk-epil eversoft 2270 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info