Manual Braun si 8530 prostyle (page 9 of 61) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

323032

Zoom out

Zoom in

1/61

To turn on the iron again, just move it.

When the «auto-off» pilot light stops

flashing, the electrical power is on again.

E Textile Protector

(Model 8595/8590 only)

Before attaching the Textile Protector

for the first time, iron approximately

2 minutes without the Textile Protector.

The Braun Textile Protector protects

delicate fabrics from heat damage and

makes it possible to iron most dark fabrics

without an intermediate cloth. To check

the reaction of your fabrics before you

start ironing, we recommend that you iron

a small section of material on the reverse

side. With the Protector, you are able to

iron delicate fabrics with the temperature

setting «

•••

» or «

max

», so that you can

use all steam functions your iron offers.

After having attached the Textile Protec-

tor, wait about 1

minutes before you

start ironing. Always store your iron with

the Textile Protector detached.

F After ironing

Unplug the iron. To prolong the life of the

iron, empty the water tank. Store the cool

iron in a dry place always standing on its

heel rest.

G Maintenance and cleaning

To clean the sole plate, use steel wool.

Never use a scouring pad, vinegar or other

chemicals.

H Cleaning the anticalc valve

The anticalc valve on the steam regulator

has to be decalcified regularly (e.g. when-

ever steam development is insufficient).

For this, the water tank has to be empty

Removing the steam regulator with the

anticalc valve

Turn the steam regulator clockwise to the

double arrow at the end of the anticalc

section and it will lift. Pull it out vertically.

Do not touch the anticalc valve at its lower

end. Immerse the anticalc valve in vinegar

(not vinegar essence) or lemon juice for

minimum 30 minutes. Brush off remaining

residues and rinse under running water

(fig. H 1-5).

Re-inserting the steam regulator

To re-insert the steam regulator follow fig.

6 and 7.

Notice:

The iron must not be used without

the steam regulator.

I Decalcifying/anticalc system

In order to clean the steam chamber from

residues, decalcify it as shown in fig.

I 1-11.

Caution:

Hot water and steam will come

out from the sole plate when the steam

regulator is turned clockwise into the

anticalc area.

Wait for the sole plate to cool down, then

clean it as described above.

Then refill the tank with water, heat up

the iron and press the power shot button

4 times to rinse the iron before ironing

(I 12-13).

Do not use commercial decalcifiers, they

may damage the iron.

J Trouble-shooting guide

Subject to change without notice.

This product conforms to the European

Directives EMC 89/336/EEC and Low

Voltage 73/23/EEC.

Please do not dispose of the product in

the household waste at the end of its

useful life. Disposal can take place at a

Braun Service Centre or at appropriate

collection points provided in your country.

Problem Remedy

Drops coming

out of the steam

vents

Turn the steam

regulator anti-clock-

wise to reduce the

steam or turn it off.

Take longer intervals

when pressing the

«jet», power shot or

steam plus button.

«jet» of steam

does not function

Press the «jet» button

several times.

Less steam

develops or no

steam at all

Check water level.

Clean the anticalc

valve.

Calcium particles

coming through

the steam vents

Decalcify the steam

chamber.

SI8000_MN_S6-64 Seite 9 Dienstag, 20. Juni 2006 2:33 14

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Braun si 8530 prostyle in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,17 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Braun si 8530 prostyle Manual

Product: