Manual Braun SI 6120 (page 9 of 73) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

454443

Zoom out

Zoom in

1/73

•

Keep the iron in the upright position and

connect it to the mains. Select the tem-

perature according to the ironing guide on

the heel rest of the iron or on the label in

your garments.

•

The temperature pilot light (7) goes off,

when the desired temperature is reached

(after approx. 1 minute).

C Ironing

1 Steam on/off

For steam ironing, the temperature selector

(6) must be set within the red range.

Press the steam button (3) to start the

steam mode.

steam on steam off

With the steam button in its upper position

(steam on), turn the steam regulator (3a) to

adjust the steam quantity.

We recommend a medium steam setting

for all normal ironing. Only when ironing

linen, thick cotton or similar fabrics we

recommend the maximum steam setting.

Preconditioning

(not with model SI 6120)

Steam develops also horizontally at the

front area of the sole plate. This precondi-

tions the textiles by «pre-steaming», thus

making ironing easier.

Be careful – steam comes out laterally.

2 Power shot

Prior to use, press the power shot button

(5) 3 to 4 times to activate it. Press the

power shot button in intervals of at least

5 seconds.

Power shot can be activated when dry

ironing. However, the temperature selector

has to be set in the range between «•••»

and «max». The power shot function can

also be used in the vertical position for

steaming hanging clothes (not with model

SI 6120).

3 Spray function

Press the spray button (4).

4 Dry ironing

Turn the steam mode off by pressing the

steam button (3) so that it catches in the

lower position.

D Automatic shut-off

(model 6595/6265 only)

The auto-off mechanism causes a slight

rattling noise during ironing. This is normal

and in no case indicates a fault of the iron.

The «auto-off» pilot light will flash when the

automatic shut-off is activated.

This happens when the iron has rested …

– horizontally

on its sole plate for about

30 seconds or

– vertically

on its heel rest for about

8/15 minutes.

To turn on the iron again, just move it.

When the «auto-off» pilot light stops

flashing, the electrical power is on again.

The automatic shut-off will be activated

approximately 2 minutes after the iron is

plugged into a socket.

E Textile Protector

(models 6590/6595 only)

Before attaching the Textile Protector (9) for

the first time, iron approximately 2 minutes

without the Textile Protector.

The Braun Textile Protector protects

delicate fabrics from heat damage and

makes it possible to iron most dark fabrics

without an intermediate cloth. To check the

reaction of your fabrics before you start

ironing, we recommend that you iron a

small section of material on the reverse

side. With the Protector, you are able to iron

delicate fabrics with the temperature setting

•••

» or «

max

», so that you can use all

steam functions your iron offers.

After having attached the Textile Protector,

wait about 1

minutes before you start

ironing. Always store your iron with the

Textile Protector detached.

F After ironing

•

Unplug the iron and press the steam on/off

button (3) so that it catches in its lower

position (steam off).

•

To prolong the life of the iron, empty the

water tank.

•

Store the cool iron in a dry place always

standing on its heel rest.

G Maintenance and cleaning

To clean the sole plate, use steel wool.

Then wipe the sole plate clean with a cloth.

Never use a scouring pad, vinegar nor

other chemicals. To clean the soft material

of handle and power shot and spray

buttons, use soapy water.

H Cleaning the anticalc valve

The iron’s anticalc valve is located at the

lower end of the steam button (3). It has

to be decalcified regularly (e.g. when the

steam development is insufficient).

Proceed as follows:

4674361_SI6000_S6-76 Seite 9 Donnerstag, 8. September 2005 10:23 10

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Braun SI 6120 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Braun SI 6120 Manual

Product: