11
d) Press RIGHT to select SD Card.
e) Press OK to choose Enter to enter into submenu.
f) Press down to select OK. OK will be highlighted.
g) Press OK to start formatting the SD-card. During formatting, the display
screen will show a message “Please Wait”.
h) Press MENU to cancel setting and return to info display.
4.1.8 Set Photo Size
This parameter has three values: 12MP, 8MP and 5MP. The default value is 5 mega
pixels. The following shows how to set pixel size as 12M Pixel:
a) Press MENU to display the setting menu.
b) Press DOWN to select Resolution
c) Press Right to select 12M Pixel
d) Press OK to save the current setting, then press menu to return to info
display.
e) Press MENU to cancel setting and return to info display.
4.1.9 Set Video Size
This parameter also has four values: 1080P, 720P, WVGA and QVGA.
The default value is 1080P, the following shows how to set it to be WVGA video size:
a) Press MENU to display the setting menu.
b) Press DOWN to select Resolution.
c) Press RIGHT to select WVGA
d) Press OK to save the current setting, then press menu to return to info
display.
e) Press MENU to cancel setting and return to info display.
4.1.10 Set Date and Time
You can change the date and time of the device by setting this parameter when
necessary, e.g., after every battery change. The date format is day/month/year, the
time format is hour: minute: second. The valid value for year is between 2010 and
2050.
Provided that the date and time are needed to be set to November 15th, 2011 and
half past ten, the steps are as following:
a) Press MENU to display the setting menu.
b) Press right enter into “system”
c) Press DOWN to select Date/Time.
d) Press Right to Display Date/Time Interface, Press UP and DOWN to change
the Value.
e) Press OK to save the current setting, then press MENU to return to info
display.
f) Press MENU to cancel setting and return to info display.
