695662
11
Zoom out
Zoom in
Previous page
1/96
Next page
11
ActiveBlade Shaft (A)
The hand blender is equipped with an ActiveBlade
shaft, which enables the knife extend to the bottom
of the bell. The adjustment is made automatically by
pressure required in blending tasks, especially
suited to mix hard foods e.g raw fruits and
vegetables.
It is also perfectly suited for preparing dips, sauces,
salad dressings, soups, baby food, as well as
drinks, smoothies and milkshakes.
For best results, use the highest speed.
Assembly and Operation
Attach the ActiveBlade shaft (4) to the motor part
until it clicks.
Place the ActiveBlade shaft into the mixture to be
blended. Then switch the appliance on as
described above.
Blend ingredients to the desired consistency
using a gentle up-and-down motion. Depending
on the pressure applied, the ActiveBlade shaft will
depress and blade will extend.
After use, unplug the hand blender and press the
EasyClick Plus release buttons (3) to detach the
ActiveBlade shaft.
Caution
Do not let liquids or ingredients overlap the green
line of the ActiveBlade shaft.
If using the appliance to purée hot food in a
saucepan or pot, remove the saucepan or pot
from the heat source and ensure the liquid is not
boiling. Allow hot food to cool slightly to avoid risk
of scalding.
Do not let the hand blender sit in a hot pan on the
cooktop when not in use.
Do not scratch the ActiveBlade shaft over the
bottom of pans and pots.
Recipe Example: Mayonnaise
250 g oil (e.g. sunflower oil)
1 egg and 1 extra egg yolk
1–2 tbsp. Vinegar
Salt and pepper to taste
Place all ingredients (at room temperature) into
the beaker in the order as above.
Place the hand blender at the bottom of the
beaker. Blend at maximum speed until the oil
starts emulsifying.
With the hand blender still running, slowly raise
the shaft to the top of the mixture and back down
to incorporate the rest of the oil.
NOTE: Processing time: approx. 1 minute for
salads and up to 2 minutes for a thicker
mayonnaise (e.g. for dip).
Whisk Accessory (A)
Use the whisk only for whipping cream, beating egg
whites, making sponge cakes and ready-mix
desserts.
Assembly and Operation
Attach the whisk (6b) to the gearbox (6a).
Align the motor part with the assembled whisk
accessory and push the pieces together until
they click.
After use, unplug and press the EasyClick Plus
release buttons to detach the motor part. Then
pull the whisk out of the gearbox.
Tips for Best Results
Move the whisk clockwise while holding it at a
slight incline.
To prevent splattering, start slowly and use the
whisk accessory in deep containers or pans.
Place the whisk in a bowl and only then switch the
appliance on.
Always ensure the whisk and mixing bowl are
completely clean and free of fat before whisking
egg whites. Only whip up to 4 egg whites.
Recipe Example: Whipped Cream
400 ml chilled cream (min. 30% fat content, 4 - 8
°C)
Start with low speed (light pressure on the switch)
and increase the speed (more pressure on
switch) while whipping.
Always use fresh chilled cream to achieve greater
and more stable volume when whisking.
Chopper Accessory (B)
The choppers (7/8/9) are perfectly suited for
chopping hard cheese, onions, herbs, garlic,
vegetables, bread, crackers and nuts.
Use the «hc» chopper (7) for fine results. It is not
suitable for meat.
For «hc» chopper do not exceed the quantity of
ingredients higher than max line. Maximum
operation time for the «hc» chopper: 1 minute for
large amounts of wet ingredients, 30 seconds for
dry or hard ingredients.
NOTE: leave an interval of at least 3 minutes before
operating again (To prevent faults). Immediately
stop processing when motor speed decreases and/
or strong vibrations occur.
Use the «ca» and «bc» chopper (8/9) for larger
quantities and for hard foods.
Furthermore, the «bc» chopper offers a variety of
other applications like shakes, drinks, purées,
batter, meat or crushed ice.
5722113444_01_MQ 7000x_7045x_INT_S6-96.indd 115722113444_01_MQ 7000x_7045x_INT_S6-96.indd 11 04.07.19 13:5404.07.19 13:54
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Braun MultiQuick 7 - MQ 7000 - HB701AI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Braun MultiQuick 7 - MQ 7000 - HB701AI in the language / languages: All languages as an attachment in your email.

The manual is 3,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info