69338
9
Zoom out
Zoom in
Previous page
1/38
Next page
9
Handblender 1... turbo
Whisk 3... 15
Food preparation
attachment see speed tables in
picture sections (j)
Chopper see speed tables in
picture sections (j)
How to operate your handblender 1
The handblender is perfectly suited for
preparing dips, sauces, soups, mayonnaise
and baby food as well as for mixing drinks
and milkshakes:
a) Insert the motor part ! into the blender
shaft & until it locks.
b) Introduce the handblender vertically into
the vessel, then press switch or turbo
switch .
c) To release the blender shaft after use,
press buttons and pull it off.
You can operate the handblender in the
measuring beaker Á, and just as well in any
other vessel. When blending directly in the
saucepan while cooking, take the pan from
the stove fi rst to protect the appliance from
overheating.
How to operate your whisk 2
Use the whisk only for whipping cream,
beating egg whites and mixing sponges and
ready-mix desserts:
a) Insert the whisk È into the whisk gearbox
Ë, then insert the motor part ! into the
gearbox until it locks.
b) Place the whisk in a vessel and only then,
press switch
to operate it.
c) To release, press buttons and pull off
the gearbox. Then pull the whisk out of the
gearbox.
For best results ...
use a wide bowl rather than the beaker
move the whisk clockwise, holding it slightly
inclined
Whipped cream:
Only whip up to 400 ml chilled cream
(min. 30 % fat content, 4–8 °C).
Start with a low speed setting «1» and while
whipping, increase the speed to setting «15».
Egg snow:
Only whip up to 4 egg whites.
Start with a medium speed setting «7» and while
beating, increase the speed to setting «15».
How to operate your food
preparation (FP) attachment 3
1 Pusher
2 Lid
2a Coupling for motor part
2b Filling tube
2c Lid interlock
3 Blade
4 Bowl
5 Anti-slip base (also serves as a lid)
6 Tool holder
6a Slicing tool
6b Shredding tool (coarse)
6c Shredding tool (fi ne)
6d Julienne tool (rectangular)
6e Julienne tool (triangular)
Chopping
(see picture section I with processing table j
)
The blade (3) is perfectly suited for chopping
meat, cheese, onions, herbs, garlic, carrots,
walnuts, hazelnuts, almonds etc.
For chopping hard goods, use the turbo
switch
.
N.B.: Do not chop extremely hard food, such
as nutmeg, coffee beans and grains.
Before chopping ...
pre-cut meat, cheese, onions, garlic,
carrots, chillies
remove stalks from herbs, un-shell nuts
remove bones, tendons and gristle from
meat
a) Carefully remove the plastic cover from
the blade (3). Caution: the blade is very
sharp! Always hold it by the upper plastic
part. Place the blade on the centre pin of
the bowl (4) and give it a turn to lock into
place. Always place the bowl on the anti-
slip base (5).
b) Place the food in the chopper bowl.
c) Attach the lid (2) onto the bowl with the
interlock (2c) positioned next to the bowl
handle. To lock the lid, turn it clockwise so
that the interlock engages with a «click»
above the handle.
d) Insert the motor part ! into the coupling
(2a) until it locks. Make sure the pusher is
in place.
e) To operate, press switch or on the
motor part and take hold of the bowl with
your other hand.
f) After use, press buttons to remove the
motor part. Remove the pusher.
g) Pressing the lid interlock (2c), turn the lid
(2) counter-clockwise to unlatch it and lift it
up.
h/i) Carefully take out the blade by turning and
pulling it, before removing the processed
food.
Mixing light dough
Using the blade (3), you may also mix light
dough like a pancake batter or a cake mixture
based on up to 250 g fl our.
For a pancake batter, for instance, fi rst pour
liquids into the bowl, then add fl our and fi nally
eggs. Pressing the turbo switch
, mix the
batter until smooth.
Slicing / shredding
(see picture section II with processing table j
)
Using the slicing tool (6a), you can slice e.g.
cucumbers, onions, mushrooms, apples,
carrots, radishes, raw potatoes, courgettes,
cabbage.
Using the shredding tools (6b, 6c), you can
shred e.g. apples, carrots, raw potatoes,
beetroot, cabbage, cheese (soft to medium).
The Julienne tools (6d, 6e) cut food into strips.
These tools should be handled with care to
avoid injury.
a) Place a tool (6a–6e) into the tool holder
(6) and snap into position. Place the tool
holder on the centre pin of the bowl and
give it a turn to lock into place.
b) Attach the lid (2) onto the bowl with the
interlock (2c) positioned next to the bowl
handle. To lock the lid, turn it clockwise so
that the interlock engages with a «click»
above the handle.
c) Insert the motor part into the coupling until
it locks. Select speed settings according to
recommendations in picture (j).
d) Fill the food to be processed into the fi lling
tube. Never reach into the fi lling tube when
the appliance is switched on. Always use
the pusher (1) to feed in food.
e) Press switch
or on the motor part to
operate.
98907298_MR6550_MFP_S6-40.indd 998907298_MR6550_MFP_S6-40.indd 9 02.04.2009 15:55:15 Uhr02.04.2009 15:55:15 Uhr
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Braun MR 6550 M FPHC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Braun MR 6550 M FPHC in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Braun MR 6550 M FPHC

Braun MR 6550 M FPHC User Manual - English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info