Manual Braun K 3000 - Multisystem Type 3210 (page 9 of 61) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish)

549589

Zoom out

Zoom in

1/61

Our products are engineered to meet the

highest standards of quality, functionality and

design. We hope you thoroughly enjoy your

new Braun appliance.

The Braun K 3000 is a kitchen machine system

which fulfils highest demands for kneading,

mixing, stirring, whipping, chopping, slicing,

shredding and grating, simply and quickly.

Read all instructions carefully before using

this product.

Important

• The blades o and s are very

sharp!

Take hold of the blades by the knob only.

After use, always first remove the blade from

the bowl before removing the processes

food.

• Keep the appliance out of the reach of

children.

• This appliance is not intended for use by

children or persons with reduced physical or

mental capabilities, unless they are given

supervision by a person responsible for their

safety. In general, we recommend that you

keep the appliance out of reach of children.

• This appliance was constructed for

household use only to process the listed

quantities.

• Do not use any part in the microwave oven.

• Do not allow the appliance to operate

unsupervised.

• Braun electric appliances meet applicable

safety standards. Repairs or the replace-

ment of the mains cord must only be done by

authorised service personnel. Faulty,

unqualified repair work may cause

considerable hazards to the user.

• Switch the appliance off and disconnect from

the mains before storing.

Basic unit (see page 4)

1 Motor block

2 Cord store

3 Control lamp for safety fuse

4 Motor switch (constant operation/

on: «I/on», off: «off/0»,

automatic pulse: «auto.pulse»)

5 Press button for manual pulse

6 Electronic speed regulator

(variable 2 –14, also with pulse mode)

7 Kneading attachment

8 Drive arm

H Mixing attachment

h Whisk attachment

9 Spatula

j Filling tube

Lid

l Dough bowl (stainless steel)

Safety fuse

The control lamp 3 flashes to indicate that the

motor is overloaded and will soon switch off.

As soon as the safety fuse has switched off the

motor, the control lamp 3 is constantly lit up.

Turn the appliance off with the motor switch 4

(switch position «off/0»). Wait approximately

15 minutes to allow the motor to cool off. Then

switch the appliance on again using the motor

switch

4 (position «I/on»). If the control lamp 3

should light up again and the motor does not

start, repeat the cooling procedure as

described above.

Important: lf the motor has automatically

switched itself off because of an overload, the

appliance can only be switched back on with

the motor switch 4 if it had been switched off

(position «off/0») with this switch before.

Speed regulator

It is recommended to select the speed first with

the variable, electronic speed regulator 6 and

then switch on the appliance in order to work

with the desired speed right from the beginning.

Recommended

Attachment speed range*

—————————————————————

Dough bowl

Whisk attachment 7 ... 14

Mixing attachment 5 ... 14

Kneading attachment 2... 7

Food processor bowl

Blade 7 ...14

- Discs 2 ...14

Glass liquidiser goblet

7...14

* see table on front panel of housing

Pulse mode

The pulse mode is useful for the following

applications:

• Carefully adding flour to doughs so as not to

affect their creaminess.

• Adding whipped eggs or cream to more solid

food.

• Chopping delicate and soft food, e.g. eggs,

onions.

Turn the motor switch

to the «auto.pulse»

position in order to start the automatic pulse

mode. This causes short bursts of operation

of identical length at the chosen speed. The

function «auto.pulse» is switched off by

switching the appliance off (motor switch 4

at «off/0»).

The manual pulse mode «pulse

•

» is operated

by pressing the button 5 when the appliance is

switched off (motor switch on «off/0»). Using

the manual pulse mode, you can vary the length

of the pulses. The appliance operates at the

chosen speed as long as the button

5 is

pressed down. When the button is released, the

motor will stop.

Caution: max. 15 pulses per minute

Attaching and removing the dough

bowl and the lid

Please clean all parts before using for the first

time (see paragraph «Cleaning»).

For safety reasons, always carry or lift the

appliance with both hands.

Ö Place the bowl l onto the motor block 1 so

that the markings on the bowl match those

on the motor block. Turn the bowl clockwise

until it clicks.

Ü/á Push the attachment needed as far as

possible onto the drive shaft in the bowl.

à Place the lid on the bowl so that the arrow

on the lid matches the arrow on the bowl l.

Then turn the lid clockwise until the nozzle

(lug) on the lid enters the safety lock on the

motor block and audibly snaps into place.

To remove, turn the lid anti-clockwise.

The filling tube j has to be inserted into the

lid’s opening so that the higher rim is facing the

inside. It allows more convenient adding of

ingredients while processing.

Double safety lock: The motor can only be

started if both the bowl

l and the lid are

locked into place. The lid can only be removed

from the bowl, if the motor is switched off.

When the appliance is switched off, turn the lid

anti-clockwise and lift it off

. Take out the

attachment. Turn the bowl l anti-clockwise to

lift it off.

Cleaning

Always switch off the motor first and then

unplug the appliance before cleaning.

Clean the motor block 1 with a damp cloth

only.

Some types of food (e.g., carrots) can lead to

discolouration; wipe off first with cooking oil

before washing.

The kneading attachment 7 and the drive arm

8 should only be cleaned manually. Do not

immerse in water. All other parts can be washed

in the dishwasher at a maximum temperature of

65 °C.

Parts which are difficult to reach, e.g., the

indentation on the inside of the lid should be

well cleaned with the spatula 9 (e) and a brush

if necessary.

Do not use sharp objects for cleaning.

Care and cleaning instructions for

the stainless steel dough bowl

• Rinse in hot soapy water before first use.

• Rinse in hot soapy water as soon as possible

after use, especially after processing very

salty food.

• Stubborn food residues should be soaked

and removed with a sponge (do not use a

scouring pad) or brush.

• When cleaning in a dishwasher, remove the

stainless steel bowl from the dishwasher as

soon as the cleaning program is finished in

order to prevent stains from remaining water

drops. Be carefully to avoid an overdose of

cleaner and decalcifier.

• Carefully dry the bowl before storing it away.

Kneading

The kneading attachment 7 is specially

designed for making yeast dough, pasta and

pastries. It is not suitable for making cake

dough. For cake dough, use the mixing

attachment H.

Place all ingredients into the dough bowl l

after the kneading attachment has been

assembled.

Yeast dough (bread, cake)

Up to 1.5 kg flour plus ingredients:

Speed 2–7 3 to 5 minutes

First, place the flour and then all other

ingredients – except milk – into the dough bowl,

including raisins, candied peel and almonds.

English

98907297_K3000_S_6-64 Seite 10 Donnerstag, 7. Mai 2009 11:07 11

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Braun K 3000 - Multisystem Type 3210 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Braun K 3000 - Multisystem Type 3210 Manual

Product: