650821
6
Zoom out
Zoom in
Previous page
1/54
Next page
6
English
Our products are engineered to meet the highest
standards of quality, functionality and design.
We hope you thoroughly enjoy the new Braun
appliance.
Read all use instructions thoroughly before
using this product.
Important
This appliance shall not be used by
children. Keep the appliance and its
cord out of reach of children. Switch
off the appliance and disconnect from
supply before changing accessories
or approaching parts that move in use.
This appliance can be used by per-
sons with reduced physical, sensory
or mental capabilities or lack of expe-
rience and knowledge if they have
been given supervision or instruction
concerning use of the appliance in a
safe way and if they understand the
hazards involved.
Always disconnect the appliance from
the supply if it is left unattended and
before assembling, disassembling or
cleaning.
This appliance is designed for normal
household use only.
Your voltage must correspond to the
voltage printed on the type plate
located on the bottom of the power
base. Connect to AC (~) only. When
connecting to an outlet, the motor
must always be turned off (rotary
switch (i) at «O»).
The Blades are very sharp, handle
carefully.
Do not grab into the jug while the lid is
open – risk of injury by the knife.
The appliance works only if the jug is
correctly assembled on the power
base.
Before switching on, make sure the
jug is properly assembled and in place
on the power base with the lid (incl.
measuring cup) on.
Do not use the device without any
load in the jug.
Allow hot liquids to cool off before
pouring it into the jug.
Braun electric appliances meet appli-
cable safety standards. Repairs or the
replacement of the mains cord must
only be done by authorised service
personnel. Faulty, unqualified repair
work may cause considerable hazards
to the user.
During first usages under heavier
load, the appliance can emit some
smell. This is a normal occurrence and
does not mean any technical defect.
Be careful if hot liquid is poured into
the food processor or blender as it
can be ejected out of the appliance
due to a sudden steaming.
Description
a Measuring cup
b Lid
c Lid gasket
d Jug
e Blade gasket
f Blade unit with fastener ring
g Power base
h Rotary switch
i Cord storage
Max. processing capacity: 1.6 litres
Prior to use
Clean all parts before using the jug blender for
the fi rst time (see paragraph «Cleaning»).
Uncoil amount of cord needed from cord storage
at the bottom of the power base and connect to
an outlet.
Jug assembly
Carefully place the blade into the fastener ring.
Position the blade gasket onto the rim of the
blade unit.
Screw the jug securely clockwise into the
fastener ring until limit is contacted.
Attaching the jug
Make sure that the rotary switch is in the «O»
position.
2231002IBR_JB5050_S4-54.indd 62231002IBR_JB5050_S4-54.indd 6 17.06.14 15:3817.06.14 15:38
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Braun JB 5050 - IdentityCollection 4125 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Braun JB 5050 - IdentityCollection 4125 in the language / languages: All languages as an attachment in your email.

The manual is 4,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info