Manual Braun IS 5055 CareStyle 5 Pro (page 10 of 95) (All languages)

600029

Zoom out

Zoom in

1/95

• Place the appliance on a stable, level surface

(like a table or the floor).

Note:

If you use filtering devices, make absolutely sure

the water obtained is neutral ph.

Low Water

• When the water level is low, the icon is

permanently on.

• The temperature control LED (12) is blinking and

the icon related to the selected setting / /

turns off.

• If you want to continue steam ironing, refill the

tank of the steam station (A).

(B) Start ironing

• Place the iron on the iron rest (5) or on its heel

rest (15), plug in the appliance and press the on/

off switch on the station (2).

• Select the setting (3) on the ironing system most

suitable for the garments to be ironed.

• The iron will start to heat up: Whilst this is

happening, the temperature control LED (12) on

the iron will flash.

• The related icon in the display (1) will start to blink

until steam is ready.

• Once the temperature setting is reached, the

temperature control LED is permanently on.

• For steam ironing press the steam button (11)

below the iron handle. Steam will come out from

all the holes in the soleplate.

The ultimate iCare technology provides the right

combination of temperature and steam.

The interface (3) has 3 settings:

eco

It is suggested for most delicate garments like

synthetics and blended fabrics. This setting allows

less power consumption.

normal

It is suggested for garments like wool, polyester

and silk.

turbo

It is suggested for garments that need more

powerful steam, like cotton, linen and jeans.

Note: Due to higher temperature in the turbo mode,

do not leave unattended the iron on garments to

avoid any damage.

To switch from one setting to another press the

dedicated button (3).

Note: When the ironing system is switched on, it will

always be set to the normal steam mode,

independently on the last setting chosen.

• Double trigger: Press the steam button (11) or

the precision shot button (13) twice in quick

successionwithin 1 second. There will be a

continuous steam emission for a few

seconds.Press the steam button (11) or the

precision shot button (13) once again to stop the

function.

• For dry ironing select the setting most suitable

for the garments to be ironed, then iron without

pressing the steam button (11).

Please note that after 10 minutes of dry ironing,

the iron switches to the auto-off mode.

• Vertical steam: The iron can also be used for

steaming hanging clothes (B).

• The special Saphir coating of the soleplate

guarantees an excellent scratch resistance.

• The unique round shape of the Saphir 3D

soleplate ensures best gliding results on difficult

parts (e. g. buttons, pockets and tough wrinkles).

• Press the precision shot button (13) completely

down.

• Steam will come out of the tip area of the

soleplate only.

• To stop this function just release the button (13).

• If you don’t press it down completely, some

steam may also come out from the rear steam

holes in the soleplate.

(D) Iron Auto-Off

When the iron is in the auto-off mode, the icon is

flashing and the temperature control LED (12) is off.

The iron will turn off to reduce power consumption.

It is activated if after 10 minutes:

• there has been no steam emission.

• the icon

is activated and water tank is not

refilled.

To turn the iron on again, the ON/OFF (2) button

has to be pressed. Before starting ironing again wait

until the temperature control LED (12) is

continuously on.

After ironing

• Press the On/Off button to turn off the appliance (2).

• Unplug and let the appliance cool down before

storing.

• Empty the water tank.

• Lock the iron.

DLB236337_CareStyle_5_IS5055_Use_Instruction_INT.indb 9 16.06.15 16:03

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Braun IS 5055 CareStyle 5 Pro in the language / languages: All languages as an attachment in your email.

The manual is 6,49 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Braun IS 5055 CareStyle 5 Pro Manual

Product: