Components and
features
Product includes the following components:
• Braun ThermoScan Instant Thermometer
• Lens Filters (20, plus one on thermometer)
• Storage Cover (See Figure 5)
• Use Instructions
• Labels
Not included, but required:
• One 9 volt alkaline battery
(6 LR 61, MN 1604 9V, alkaline).
Preparing the Braun
ThermoScan Instant
Thermometer for use
To remove the thermometer from the storage
cover, slide it forward in the cover (Figure 2a,
arrow 1), then lift up (Figure 2a, arrow 2).
Open the battery door by pressing in at the
arrow and sliding the door down toward the
base of the instrument (Figure 2b)
.
The thermometer is shipped with the Celsius/
Fahrenheit switch set to Celsius. If you wish to
have temperatures displayed in Fahrenheit
(°F), slide the switch as shown (Figure 3a).
The Braun ThermoScan Instant Thermometer
uses a 9 volt battery. To install it, snap the
positive and negative terminals of the battery
onto the appropriate receptacles on the
connector (Figure 3b). Place the battery inside
the compartment and slide the battery door
back into place.
Note: Minimum battery life is one year or
300 temperatures when an alkaline battery
is used.
6 7
Figure 1
Figure 2
Figure 3
1 Activation Button
2 Lens
3 Lens Filter
4 LCD Liquid Crystal Display
5 On-button
6 Battery Door
7 Attach new lens filter
