695213
8
Zoom out
Zoom in
Previous page
1/73
Next page
E
G
CORRECT
Gel layer
Skin
INCORRECT
Gel layer
Skin
H
6. Double check the result by comparing
the skin tone of the treated area to
the Skin Tone Chart.
3. Press the Skin Tone Sensor button to
receive a skin tone reading:
If an illuminated WHITE light
(settings I, II, III, IIII) appears, the
skin tone in this area is suitable for
treatment.
If an illuminated RED light appears,
this indicates the skin tone in this area
is not suitable for treatment.
4. lMPORTANT: Before treating another
body part, you must perform a new
measurement.
NOTE: If all lights illuminate, this
indicates that the measurement taken
is not valid, e.g., Skin Tone Sensor
does not have good contact.
5. Replace the Skin Tone Sensor in
the base unit. The Skin Tone Sensor
button will illuminate WHITE which
indicates that the unit is ready for use.
The device setting will automatically
adjust to the Skin Tone Sensor
reading. The white setting light
indicates the power setting.
IMPORTANT: If there is a difference
between the skin tone identified
by the Skin Tone Sensor and the
Skin Tone Chart, you should always
use the higher number/darker tone
setting (emits less light energy). For
example: if the Skin Tone Sensor
indicates (III) and the Skin Tone
Chart indicates (IIII), you should use
(IIII).
7. Press the Skin Tone Sensor button
repeatedly until the correct skin tone
setting appears.
I – IIII on the Skin Tone Sensor.
Setting I is the HIGHEST power
setting and is for people with fair
skin as shown on the Skin Tone
Chart—Skin Tone 1.
Setting II is the MEDIUM power
setting and is for people with
medium skin tone as shown on the
Skin Tone Chart—Skin Tone 2.
Setting III is a LOWER power
setting and is for people with darker
skin as shown on the skin tone
chart—Skin Tone 3.
Setting IIII is the LOWEST power
setting and is for people with darker
skin as shown on the Skin Tone
Chart—Skin Tone 4.
NOTE: You can choose a higher
number/darker tone setting (emits
less light energy) than your Skin
Tone Sensor measurement result,
but a lower number/lighter skin tone
setting cannot be selected.
Treatment
Before your first treatment, we advise
you to perform a patch test on a small
area of skin on a body part you plan to
treat. Please refer to page 17 for Patch
Test details.
Once you have established the correct
skin tone setting and prepared the
treatment area, you are ready to begin
your treatment.
1. Apply a thick layer of Activating Gel
to the area. DO NOT RUB IN. The gel
should remain in a thick layer on the
skin to ensure proper contact with the
Handset.
STANDBY Mode
When the Skin Tone Sensor is
placed in the base unit, after 10
minutes of inactivity, the handset
will revert to STANDBY mode
(indicated by a RED light). A new
skin tone reading is required to
re-activate the unit.
2. Wipe excess gel from your hands.
3. Select a spot on the edge of the
treatment area. Place the handset
firmly on the skin so that both contact
bars on the outer corners of the
treatment window are placed in the
Activating Gel that is on the skin
surface. A WHITE light signals you
have the proper contact. If the white
light does not appear, be sure to
adjust the handset so that both bars
remain in contact with the skin.
IMPORTANT:
Only use the Activating Gel
specifically designed for use with
this device. In order to prevent gel
from drying, larger areas should be
treated in sections.
4. Press the Activation button once.
Look away from the handset to avoid
the bright light. You will hear a click
and may feel a warm sensation.
HOW TO USE
HOW TO USE
1312
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Braun Gillette Venus Naked Skin - 6028 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Braun Gillette Venus Naked Skin - 6028 in the language / languages: Danish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 12,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Braun Gillette Venus Naked Skin - 6028

Braun Gillette Venus Naked Skin - 6028 User Manual - English, German, Dutch, French, Italian - 53 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info