454301
6
Zoom out
Zoom in
Previous page
1/39
Next page
6
Put away the unit after use only after you have turned
the motor off and disconnected the plug.
Before using
All parts of the grinder attachment were covered with a
lubricating film before leaving the factory. They must be
washed before using the first time (see «Cleaning»).
Assembly
Please note the correct assembly order of
parts
1 -5.
The sharp side of the blade
3 must face the disc 2.
Guide the notch
B in the disc 2 over the protrusion
E in the grinder head 5.
After assembling the parts
2 -4, screw the cap 1
moderately tight onto the grinder head
5.
The assembled grinder head
5 is joined to the motor
unit
9 with a bayonet lock. Insert the metal housing into
the motor unit by holding the filling shaft of the grinder
head at an angle of 45° clockwise (the level arrow on
the grinder head must coincide with the arrow on the
motor unit) (A). Turn the grinder head anti-clockwise in
the direction of the upright arrow (A) until the filling shaft
snaps into place in an upright position (B). Place the
feeder tray
6 on the filling shaft.
In order to avoid any risk caused by the rotating
blade make sure that you only attach the grinder
head
5 to the motor part after it has been completely
assembled with disc, blade and worm.
Before attaching / replacing accessories that are in
movement during operation, switch off the appliance
and unplug it.
Operating
Turn the motor on before filling in meat, fish, vegeta-
bles, etc. To do so, press the switch
8 and let it latch.
To turn the unit off, unlatch the switch by pressing
lightly.
Before processing meat, remove tendons and bones
and cut it into strips. Besides meat, the machine will
also process fish, vegetables, onions, soaked bread
rolls, boiled potatoes, stoned plums for jam. Fill the
prepared meat or vegetables into the feeder tray
6 and
push it down into the filling shaft with the pusher
7.
Never use a fork, a spoon handle or a similar object. If
meat is crushed instead of being cut properly, please
check
whether the meat grinder is assembled correctly
(e. g.
whether you have perhaps over-looked inserting
one of the parts) or clean the blade
3 and disc 2.
Notice: When processing food with high power con-
sumption – e. g. sunflower seeds mixed with oats at a
ratio of 1:3 (approximately 800 W) – do not exceed an
operating time of 10 seconds.
Before using the «Kubbe» attachment / Sausage
filler
l, the meat has to be ground twice.
Cleaning
Wipe the motor unit
9 with a damp cloth only and wipe
it dry. All other parts can be washed in hot water with
normal dishwashing liquids. The disc
2 should be
wiped dry. Do not clean in the dishwasher.
Storage
There is a practical cord storage
j at the base of the
unit (C).
Subject to change without notice.
Please do not dispose of the product in the
household waste at the end of its useful life.
Disposal can take place at a Braun Service
Centre or at appropriate collection points
provided in your country.
Guarantee
We grant a 2 year guarantee on the product
commencing on the date of purchase. Within the
guarantee period we will eliminate any defects in
the appliance resulting from faults in materials or
workmanship, free of charge either by repairing or
replacing the complete appliance at our discretion.
This guarantee extends to every country where this
appliance is supplied by Braun or its appointed
distributor.
This guarantee does not cover: damage due to
improper use, normal wear or use as well as defects
that have a negligible effect on the value or operation
of the appliance. The guarantee becomes void if
repairs are undertaken by unauthorised persons and
f original Braun parts are not used.
To obtain service within the guarantee period, hand
in or send the complete appliance with your sales
receipt to an authorised Braun Customer Service
Centre (address information available online at
www.service.braun.com).
For UK only:
This guarantee in no way affects your rights under
statutory law.
+
11
99570729_G1500_S4_42 Seite 6 Dienstag, 15. Juni 2010 8:10 08
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Braun G 1500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Braun G 1500 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info