Manual Braun ExactFit BP 4900 (page 5 of 61) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

460292

Zoom out

Zoom in

1/61

Morning Average (for BP5900 only)

• Press the “Average ” (3) button again into “Morning

Average ” mode, the morning measurements

in memory within past 7 days will show on LCD.

• If there is no data in memory within past 7

days, “ ” will show on LCD.

Evening Average (for BP5900 only)

• Press the “Average ” (3) button once again into “Evening

Average ” mode, the evening measurements in memory

within past 7 days will show on LCD.

• If there is no data in memory within past 7 days, “

” will

show on LCD.

Erasing Data

• Press the “Memory

” (2) button into Memory mode.

• Press and hold the “Mode

” (5) button and then press the

“Set ” (4) button, all the stored data will be erased and

CLR will show on screen.

• To check if the data was erased, press the “Memory

” (2)

button. No data should show up on screen, but date, time

and M:00.

Morning Hypertension Setting (for BP5900 only)

Morning Hypertension symbol will appear when Morning Average is above your

pre-congured Systolic rate and/or pre-congured Diastolic rate, AND/OR one or both of

these measurements is 20% or more above Evening Average.

** Your pre-congured Systolic / Diastolic should be decided between you and your

doctor or healthcare provider.

• After setting Date and Time, press “Mode

” (5) button into

“Morning Hypertension ” setting mode “- - ” on Systolic

position will ash for Systolic setting.

• Press “SET

” (4) button, LCD will appear 135 mmHg for SYS

as the internal pre-set value, then press “Set ” button

repeatedly to set his own value (Range from 70~250 mmHg)

• Press “Mode

” (5) button again into “Morning Hypertension

” setting mode “ - - ” on Diastolic position will ash for

Diastolic setting.

• Press “SET

” (4) button, LCD will appear 85 mmHg for DIA as

the internal pre-set value, then user presses “SET ” button to

set his own value (Range for DIA is 40 ~ 115 mmHg).

• User can press START/STOP

(1) button to exit setting mode

and go back to standby at any step.

Irregular Heart Beat Detector (for BP5900 only)

The appearance of this symbol signies that a certain pulse irregularity was detected

during the measurement. Talking, moving, shaking or an irregular pulse during the

measurement can result in the appearance of this icon. Usually this is not a cause for concern,

however if the symbol appears often, we recommend you seek medical advice. The device does

not replace a cardiac examination, but service to detect pulse irregularities at an early stage.

Low Battery Indicator

When the low battery indicator ashes on the display, it means the battery is low and

the four batteries need to be replaced with Alkaline LR6 (AA) batteries.

** After replacing batteries, BPM will go into TIME-SETTING mode automatically and show the

last measurement time on screen. Please SET the current DATE / TIME before taking the next

measurement to get correct AVERAGE result.

Storage and Cleaning

• Always keep the unit in the carrying case after its use.

• Do not put the item directly under the sunlight, in high temperature or humid and dusty

places.

• Do not store in extremely low (less than -20°C) or high (more than 60°C) temperature.

temperature.

• Use a piece of cloth with water or mild cleansing agent to clean the case and then use a piece

of dry cloth to wipe it dry. Use a piece of dry cloth to wipe the cu when it is dirty.

• Do not use any strong cleansers to clean it.

• When the unit is not to be used for a long time, remove the batteries.

(Batteries may leak or cause harm).

What to do if …..

Problem Reason Solution

Heart Rate

Symbol

Appears in the measurement

condition and ashes when

pulse is detected.

• Measurement in progress, remain quiet.

Low Battery

Indicator

Appears when the battery

voltage is excessively low or

the positions of the batteries

are incorrect.

• Replace all four batteries with new ones.

Insert the batteries in the correct

positions. Be aware of +/- positions.

Measuring

Error

Appears when the accurate

blood pressure and pulse

could not be obtained.

• Press “Start/Stop” button again and

remeasure.

• Check if cu is wrapped

according to instructions.

• Check that there are no kinks in tube.

• Check palm if exerting eort.

• Check if talking or moving

during measurement.

• Check if posture is correct.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Braun ExactFit BP 4900 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 27,95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Braun ExactFit BP 4900 Manual

Product: