695687

Braun CareStyle Compact IS 2044 Manual

15
Zoom out
Zoom in
Previous page
1/130
Next page
15
Troubleshooting guide
PROBLEM CAUSE REMEDY
The appliance does not pro-
duce any steam.
There is not enough water in the
water tank.
Unplug the appliance; check if the
anti-limescale fi lter cartridge has
been well prepared and is placed
properly; fi ll water up to max. level;
close the lid of the water tank; plug
in and wait until the temperature
control LED is permanently on;
press the steam button until steam
comes out of the soleplate.
In case above procedure does
not solve the problem take the
following steps: press RESET +
steam buttons together until steam
comes out. Once steam comes out,
release the buttons.
The steam button has not been
pressed.
A new anti-limescale fi lter car-
tridge has just been installed.
The anti-limescale fi lter cartridge
is not placed properly.
The anti-limescale indicator is
on and less or no steam comes
out of the iron when pressing
the steam button.
The anti-limescale fi lter cartridge
needs to be replaced.
Replace the anti-limescale fi lter
cartridge and press the reset button
for 5 seconds until the LED turns
off .
You can also use demineralised wa-
ter. In that case, you need to leave
the anti-limescale fi lter cartridge
in the compartment and press the
reset button for 5 seconds each
time the the antilimescale indicator
turns on.
The appliance emits a loud
noise associated with vibra-
tions (subtle pumping sound is
normal).
A new anti-limescale fi lter car-
tridge has just been installed.
Continue to press the steam button
until the loud noise stops and steam
comes out of the soleplate.
The water tank is empty.
Refi ll the water tank and press the
steam button until the loud noise
stops and steam comes out of the
soleplate.
The anti-limescale fi lter cartridge
is not in place.
Place the anti-limescale fi lter car-
tridge in the compartment.
The anti-limescale fi lter cartridge
is damaged or shows cracks.
Inspect the anti-limescale fi lter car-
tridge thoroughly. If you see any
sign of damage or cracks, replace
the anti-limescale fi lter cartridge
with a new one.
The fi rst time the appliance is
turned on, you notice smoke
/ smell.
Some parts have been treated
with sealer/lubricant which
evaporates the fi rst time the iron
heats up.
This is normal and will stop when
you have used the iron a few times.
If the smoke/smell is still present
after turning off the appliance, con-
tact an authorised Braun Customer
Service.
There is too much steam
coming out of the iron.
Mode turbo is on.
Activate the iCare or eco mode by
pressing the mode button.
5712812131_CareStyle_1_INT_S6-130.indd 155712812131_CareStyle_1_INT_S6-130.indd 15 28.08.18 14:0928.08.18 14:09
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Braun CareStyle Compact IS 2044 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Braun CareStyle Compact IS 2044 in the language / languages: All languages as an attachment in your email.

The manual is 11,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info