634912

Braun CareStyle 5 - IS 5022 Manual

10
Zoom out
Zoom in
Previous page
1/95
Next page
Low Water
• When the water level is low, the icon is
permanently on.
• The icons / turn off
• If you want to continue steam ironing, refill the
tank of the steam station (A).
(B) Start ironing
• Place the iron on the iron rest (5) or on its heel
rest (15), plug in the appliance and press the on/
off switch on the station (2).
• After switch ON, the related icon in the display (1)
is permanently on.
• At the same time the icon
in the display (1)
will start to blink until steam is ready. This steam
setting is suitable for garments like cotton and
linen. Note: during the blinking in the display, the
steam function is deactivated.
• Once the conditions have been reached, the icon
will stay permanently on.
• The iron will start to heat up: During this, the
temperature control light on the iron (11) turns
on. Once the desired temperature is reached, the
temperature control light switches off.
• Set the desired temperature with the temperature
selector (10). Temperature level 1 (•) is suitable
for synthetics, temperature level 2 (••) for wool,
silk, polyester and temperature level 3 (•••) for
cotton and linen.
• During use, the light is turning on and off
indicating that it is heating up.
• For steam ironing, set the temperature between
temperature level 2 (••) and “max“ on the
temperature selector and press the steam button
(13) below the iron handle. Steam will come out
from all the holes in the soleplate. Please do not
set temperature below level 2 (••) for steam
ironing to avoid water drops coming out of the
sole plate.
• For dry ironing, select the temperature most
suitable for the garments to be ironed, then iron
without pressing the steam button (13) or
precision shot button (12). Take care that after 10
minutes of dry iron, the steam station turns into
„stand-by“ mode.
• The unique round shape of the 3D eloxal
soleplate ensures best gliding results on difficult
parts (e. g. buttons, pockets and tough wrinkles).
• Double trigger: Press twice the steam button
(13). There will be a steam emission for a few
seconds. To stop this function, press the button
(13) again.
• Vertical steam: The iron can be used as well for
steaming hanging clothes (B).
Note:
When starting the ironing session or when you have
not used the steam function for some time, the
steam still present in the supply hose will condense
into water. This may cause some spluttering in the
appliance and a few drops of water may come out
from the soleplate.
ECO Function
• For ironing with lower steam press the ECO
button (3) and the icon
turns permanently
on.
• Lower steam is suggested for most delicate
garments like silk, wool and synthetics.
• From 2nd switch on, the appliance works based
on the latest set function. To return to the normal
steam function press the ECO button again.
(C) Precision shot
• Press the precision shot button (12) completely
down to activate it.
• Steam is coming out of the tip area of the iron
only.
• To stop this function just release the button (12).
• If you don‘t press it down completely, some
steam may also come out from the rear steam
holes in the soleplate.
(D) Stand-by
The system (steam iron and steam station) will turn
into the stand by mode to have a power
consumption reduction. When the system is going
into the stand-by mode, the icon is blinking.
It is activated:
• after 10 minutes without pressing the steam
button (13).
• after 10 minutes if the icon
is activated, water
tank is not refilled and if there is no steam
emission.
To turn the system ON again, the ON/OFF button
(2) has to be pressed. Before start ironing again,
wait until the temperature control light (11) has
turned off.
After ironing
• Press the On/Off button to turn off the appliance
(2).
• Unplug and let the appliance cool down before
storing.
• Empty the water tank.
• For models with lock system, lock the iron.
9
DLB231614_5712811681_IS5022_UI_INT_AUNZ.indb 9 24.11.14 16:32
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Braun CareStyle 5 - IS 5022 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Braun CareStyle 5 - IS 5022 in the language / languages: All languages as an attachment in your email.

The manual is 7,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info