Manual Braun BGK 7050 - 5377 (page 14 of 78) (All languages)

695626

Zoom out

Zoom in

1/78

sensation of epilation, you may replace the massage cap (1a) with the efficiency cap

(1b) which provides a closer skin contact and an improved adaptation to all body areas.

Leg epilation

Epilate your legs from the lower leg in an upward direction. When epilating behind the

knee, keep the leg stretched out straight.

Sensitive area (e.g. underarm) epilation

• The sensitive cap (8) has been specifically designed for this use. Place it onto the

epilation head. Please be aware that especially at the beginning, these areas are

particularly pain-sensitive. Therefore, we recommend that you select speed setting

«I» for the first few times. With repeated usage the pain sensation will diminish.

• Before epilating, thoroughly clean the respective area to remove residues like

deodorant.

• When epilating the underarm, keep your arm raised up so that the skin is stretched

and guide the appliance in different directions. As skin may be more sensitive directly

after epilation, avoid using irritating substances such as deodorants with alcohol.

Cleaning the epilation head

Regular cleaning ensures better performance.

Brush cleaning (5a):

Remove the cap and brush it out. Thoroughly clean the epilator head from the rear side

with the brush dipped into alcohol. While doing so, turn the tweezer element manually.

This cleaning method ensures best hygienic conditions for the epilation head.

Cleaning under running water (5b):

After each wet usage, clean the appliance under running water. Remove the cap. Hold

the appliance with the epilation head under hot running water. Then press the release

button (6) to remove the epilation head. Thoroughly shake both, the epilation head and

the appliance to make sure that remaining water can drip out. Leave both parts to dry.

Before reattaching, make sure that they are completely dry.

Usage of the shaver head (B)

The shaver head (9) is designed for a fast and close shave of legs, chest and

underarms, trimming and cutting hair. With the shaver head attached, use the appliance

only on dry skin and with speed setting «II».

Shaving (a): select « ».

Trimming (b): select « ».

Cutting to 5mm length (c): select « » and put on the trimmer cap (I).

Cleaning (d): Remove the shaver head and tap it out. Do not clean the shaver foil (II)

with the brush as this may damage the foil.

Lubrication (e): The shaving parts need to be lubricated regularly every 3 months.

Replacement of shaving parts (f): Replace the foil frame (II) and cutter block (III)

when you notice a reduced shaving performance. Replacements parts can be obtained

from your retailer or Braun Customer Service Centres or via www.service.braun.com.

97246809_BGK_7050_MN_S6-80.indd 1497246809_BGK_7050_MN_S6-80.indd 14 21.07.15 10:3421.07.15 10:34

CSS APPROVED Effective Date 23Jul2015 GMT - Printed 24Nov2015 Page 14 of 80

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Braun BGK 7050 - 5377 in the language / languages: All languages as an attachment in your email.

The manual is 6,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Braun BGK 7050 - 5377 Manual

Product: