790306
16
Zoom out
Zoom in
Previous page
1/91
Next page
16
TREATMENT MODES
Depending on the area you wish to treat you can choose between Gliding mode and Precision mode:
The gliding mode enables fast and efficient treatments and is recommended for large skin surface areas
(e.g. legs, arms, chest and back) while the precision mode is recommended for treating sensitive or small,
hard-to reach areas such as knees, shins, ankles, bikini line or underarm and face for females.
The area to be treated has to be hair-free, clean and dry. Before pressing the treatment button, look away
from the device to avoid the bright light.
Gliding mode Precision mode
1. Place the treatment window (1) firmly on your skin, ensuring both skin sensors (2) have skin contact.
Power bars (3) show white LEDs.
2. Press and hold the treatment button (5). The
device will begin to flash. 2. Press and instantly release the treatment button
(5). The device will emit a flash.
3. Move the device slowly and continuously from
the bottom to the top of the treatment area.
Make sure to always keep full skin contact so
that the device flashes continuously.
3. Lift off the device and place it onto the next
adjacent spot to be treated. Again, wait for the
power bars to show white LEDs. Then press and
release the treatment button.
Once you have completed your first gliding stroke,
lift the device off the treatment area. Repeat steps
1 to 3 to treat the next adjacent area in a parallel
stroke.
Continue treatment spot by spot until you have
completed the entire area you wish to treat.
Make sure to avoid missed areas by placing the treatment window directly next to the previously treated
spot without leaving any space between treated areas.
If you feel intense pain, stop treatment immediately and consult your physician before using the device again.
Standby mode
After 10 minutes of inactivity, the device will revert to standby mode (which will be indicated by one blinking
light on the power indicator bars). To return to READY mode, press any key or remove/replace the power cord.
Sleep mode
If the device is not operated (no button push) for 60 minutes, it will enter sleep mode (low power state).
The Power bar LEDs are off. To return to READY mode, press any key or remove/replace the mains cord.
On wake-up the device will follow the standard Power on procedure (power bars will light up completely
once).
Facial treatment (female usage only)
Before Treatment
Ensure you have done a patch test before treating the face (see chapter «Patch Test»).
Remove any visible hair and cosmetics, lotions and creams from the area you wish to treat.
You may choose to use a mirror to help position the treatment window on the face.
Treating the face, cheek and jaw (use the «Precision mode»)
Place the treatment window on your skin. Wait for the power bars to show white LEDs. Before pressing the
treatment button, close your eyes or look away to avoid the bright light. Avoid treating the same area twice
as this may increase the chance of producing adverse reactions.
91573656_BD5001-BD5006_BD5009_Euro_A_S4-94.indd 1691573656_BD5001-BD5006_BD5009_Euro_A_S4-94.indd 16 19.06.17 15:2919.06.17 15:29
CSS APPROVED Effective Date 21Jun2017 GMT - Printed 30Aug2017 Page 16 of 94
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Braun BD 5007 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Braun BD 5007 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7.77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info