695565
10
Zoom out
Zoom in
Previous page
1/121
Next page
10
Charging
Before use, charge the appliance for 1 hour using the special cord set (6).
Unplug after charging and use the appliance cordless.
Pilot light (3) Charging status
Flashing white Charging is in progress
Constant white 5 sec, then turns off Fully charged
Yellow flashing Charging level has dropped below 10 %.
Yellow fast flashing Motor has stopped, please recharge.
The best environmental temperature for charging, using and storing is between 15 and
30 °C. Beyond this range, charging might take longer.
In case of overheating/motor blocking, the red pilot light flashes/shines constantly and
the motor turns off. Wait for the appliance to cool down and the red light to turn off
before switching on again.
Switch (4)
Press the switch centre (I) to turn the appliance on and off.
Additional switch functions depend on the head attached:
Epilation head (2) Left rotation Right rotation
Brush attachment* (7,8)
MicroVibration head* (9)
Speed 1 Speed 2
* Both the Brush attachment and the MicroVibration head are provided with a
treatment timer. A short pause after every 20 seconds of operation indicates that it is
time to move on to the next face zone (left cheek, right cheek, forehead).
Travel lock
Press the switch centre (I) 3 seconds to lock the appliance. A beep confirms that the
travel lock is activated. To unlock, press the switch 3 seconds. 3 beeps will sound when
your unlock attempt failed. Try again or simply connect the appliance to the mains.
Using the epilation head (dry use only)
Before use, make sure your skin and the epilation head are thoroughly clean.
Hold the appliance with the tweezers against a section of skin that you keep
stretched with your free hand. Carefully guide it with gentle pressure against the
direction of hair growth. Do not press too hard as this may lead to skin injury. To
stretch the upper lip area, use your tongue to push from below.
91474612_FaceSpa_Pro_910-911-912-913_921_EURO_S4-122.indd 1091474612_FaceSpa_Pro_910-911-912-913_921_EURO_S4-122.indd 10 17.08.17 15:1517.08.17 15:15
CSS APPROVED Effective Date 18Aug2017 GMT - Printed 21Nov2017 Page 10 of 122
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Braun 912 - 5366 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Braun 912 - 5366 in the language / languages: All languages as an attachment in your email.

The manual is 7,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info