Manual Braun 9-567 - 5377 (page 13 of 124) (All languages)

695615

Zoom out

Zoom in

1/124

How to epilate

Before use, always make sure that the

epilation head (2) is clean and provided

with a cap (1a or 1b).

1 Select speed «I» for a gentle epilation

and speed «II» for an efficient epilation.

2 Always stretch your skin when epilating.

Make sure that the epilation area is in

contact with your skin.

Guide the appliance in a slow, continuous

movement without pressure against the

hair growth, in the direction of the switch.

As hair can grow in different directions, it

may also be helpful to guide the appliance

in different directions to achieve optimum

results. The massage cap (1a) ensures

best skin comfort during epilation. If you

are used to the sensation of epilation, you

may replace the massage cap with the

skin contact cap (1b) which provides a

closer contact to your skin and an improved

adaptation to all body areas.

3 Leg epilation

Epilate your legs from the lower leg in an

upward direction. When epilating behind

the knee, keep the leg stretched out

straight.

4 Underarm and bikini line epilation

In sensitive areas, we recommend using

the skin contact cap (1b).

Please be aware that especially at the

beginning, these areas are particularly

pain-sensitive. Therefore, we recommend

that you select speed setting «I» for the

first few times. With repeated usage the

pain sensation will diminish.

Before epilating, thoroughly clean the

respective area to remove residues (like

deodorant). When epilating the underarm,

keep your arm raised up so that the skin

is stretched and guide the appliance in

different directions. As skin may be more

sensitive directly after epilation, avoid

using irritating substances such as deo-

dorants with alcohol.

5 Facial epilation

For removing any unwanted hair from the

face, use the facial cap (8) as an optional

attachment to be placed on the epilation

head (2).

For the first few usages, we recommend

that you select speed setting «I» in order

to get used to the epilation sensation in

those sensitive areas.

Prior to epilation, we recommend cleaning

the skin with alcohol to promote good

hygiene. When epilating the face, stretch

the skin with one hand and slowly guide

the epilator with your other hand the

direction of the switch.

6 Cleaning the epilation head

Regular cleaning ensures better per-

formance.

a Brush cleaning:

Remove the cap and brush it out.

Thoroughly clean the epilator head from

the rear side with the brush dipped into

alcohol. While doing so, turn the tweezer

element manually. This cleaning method

ensures best hygienic conditions for the

epilation head.

b Cleaning under running water:

After each wet usage, clean the appliance

under running water. Remove the cap.

Hold the appliance with the epilation head

under hot running water. Then press the

release button (6) to remove the epilation

head. Thoroughly shake both, the epilation

head and the appliance to make sure that

remaining water can drip out. Leave both

parts to dry. Before reattaching, make

sure that they are completely dry.

General information on epilation

All methods of hair removal from the root

can lead to in-grown hair and irritation

(e.g. itching, discomfort and reddening of

the skin) depending on the condition of

the skin and hair. This is a normal reaction

and should quickly disappear, but may be

stronger when you are removing hair from

the root for the first few times or if you

have sensitive skin.

91047952_SE_9-5xx_Aquila_EMEA_S6-128.indd 1391047952_SE_9-5xx_Aquila_EMEA_S6-128.indd 13 14.07.16 10:1714.07.16 10:17

CSS APPROVED Effective Date 14Jul2016 GMT - Printed 27Sep2016 Page 13 of 128

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Braun 9-567 - 5377 in the language / languages: All languages as an attachment in your email.

The manual is 11,84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Braun 9-567 - 5377 Manual

Product: