Manual Braun 7281 wd xpressive easy start body system (page 15 of 109) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

428987

Zoom out

Zoom in

1/109

using irritating substances such as deo-

dorants with alcohol.

Overheating protection

As a safety feature to avoid the unlikely event

of the appliance overheating, it may happen

that the appliance automatically turns off and

the charging lights flash (red/green). In this

case, turn the switch back to position «0»

and let the appliance cool down.

Cleaning the epilation head

Regular cleaning ensures better performance.

Brush cleaning:

5 Remove the cap and brush it out.

6 Thoroughly clean the tweezers from the

rear side of the epilator head with the

brush dipped into alcohol. While doing so,

turn the tweezer element manually. This

cleaning method ensures best hygienic

conditions for the epilation head.

Cleaning under running water:

7 Remove the cap. Hold the appliance with

the epilation head under running water.

Then press the release button (6) to

remove the epilation head (2).

Thoroughly shake both, the epilation

head and the appliance to make sure that

remaining water can drip out. Leave both

parts to dry. Before reattaching, make sure

that they are completely dry.

B Using the shaver head

attachment

a OptiTrim comb

b Shaver foil

c Trimmer

d Release buttons

e Trim/shave selector

f Cutter block

g Shaver head base

Shaving

Put on the shaver head attachment (8) by

clicking it in.

Pressing one of the lock keys, turn the

switch clockwise to setting 2.

Make sure the trim/shave selector is in the

«shave» position.

For best results, always make sure that

both, the shaver foil (b) and the trimmer (c)

are in contact with the skin (A). Keeping

your skin stretched (B), slowly move the

appliance against the direction of hair

growth. The trimmer first raises all long

hairs and cuts them off. Then the flexible

foil follows to smooth away any stubble.

When shaving or trimming in sensitive

areas, make sure that you always keep

your skin stretched to avoid injuries.

Contour trimming

For trimming precise line and contours, lock

the long hair trimmer by sliding the trim/

shave selector (e) to the position «trim» (C1).

Pre-cutting hair for epilation

If you choose to pre-cut your hair to the ideal

length for epilation, place the OptiTrim comb

(a) onto the shaver head. Slide the trim/shave

selector to the «trim» position.

Hold the appliance with the OptiTrim comb

lying flat on the skin. Guide it with the comb

tips against the hair growth as shown in

illustration C2.

N.B. As hair does not always grow in the

same direction, also guide the appliance

slightly diagonally or in different directions in

order to achieve best results.

Cleaning the shaver head

After each use, unplug the appliance.

•

98642712_SE_7281_WD_MN.indd 1598642712_SE_7281_WD_MN.indd 15 28.07.2008 12:27:44 Uhr28.07.2008 12:27:44 Uhr

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Braun 7281 wd xpressive easy start body system in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,6 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Braun 7281 wd xpressive easy start body system Manual

Product: